Acura ILX Brake Fluid Type
The Acura ILX uses Honda DOT 3 Brake Fluid as specified by the manufacturer. It’s important to note that using any non-Honda brake fluid can cause corrosion and decrease the longevity of the braking system. The manual also states that using a non-Honda brake fluid can cause corrosion and decrease the life of the system.
Additionally, it’s recommended to have the brake fluid changed every three years according to the Acura maintenance schedule to prevent the fluid from absorbing moisture and lowering its boiling point, which can lead to less responsive brakes.
Contents
- Do I need DOT 3 or DOT 4 brake fluid?
- Does ILX need premium gas?
- What happens if I put DOT 4 instead of DOT 3?
- What type of brake fluid is DOT 4?
- What oil does Acura ILX use?
- Does Acura ILX need synthetic oil?
- What is the difference between DOT 3 and DOT 4 brake fluid?
- Does it matter what brake fluid I use?
- What kind of brake fluid does Acura use?
- Which is better DOT 3 or DOT 4 brake fluid?
Do I need DOT 3 or DOT 4 brake fluid?
The primary differences between the two include the following: DOT 3 brake fluid will absorb less water than DOT 4 from the air over time, meaning you’ll need to have your fluid changed less frequently. DOT 4 brake fluid has higher dry and wet boiling points, making it safer for higher temperatures.
For models like the RDX, MDX, TLX, RLX, and ILX, premium gas is recommended.
What happens if I put DOT 4 instead of DOT 3?
They’re used in most modern cars and trucks, because they work with ABS brakes. DOT 4 has a higher boiling point than DOT 3. You can use DOT 4 where DOT 3 is called for, but not the reverse. Using DOT 3 in a DOT 4 brake risks boiling the brake fluid.
What type of brake fluid is DOT 4?
Brake Fluid DOT 4 is a complex mixture of polyglycol ethers, glycol ether borate esters and polyglycols with additional corrosion and oxidation inhibitors.
What oil does Acura ILX use?
Information
| CL | 2003: 5W-20 (S/UFS), topped off with 0W-20 (UFS) |
|---|---|
| ILX | 2013-2020: 0W-20 (UFS) |
| MDX | 2003-2006: 5W-20 (S/UFS), topped off with 0W-20 (UFS) 2007-2013: 5W-20 (S/UFS) 2014-2020: 0W-20 (UFS) |
| MDX Sport Hybrid | 2017-2020: 0W-20 (UFS) |
| RDX | 2007-2012: 5W-30 HTO-06 Specification (UFS) 2013-2020: 0W-20 (UFS) |
Does Acura ILX need synthetic oil?
Using the Right Oil: Not all oil types work for your Acura ILX model, and using the wrong oil could lead to engine damage. It is recommended that you use synthetic oil, which provides protection against deposits and sludge build-up that could harm your engine.
What is the difference between DOT 3 and DOT 4 brake fluid?
DOT 3 and DOT 4 brake fluids are glycol-based. They’re used in most modern cars and trucks, because they work with ABS brakes. DOT 4 has a higher boiling point than DOT 3. You can use DOT 4 where DOT 3 is called for, but not the reverse.
Does it matter what brake fluid I use?
Although DOT 3 and DOT 4 fluids are all glycol-based, the chemical composition of each type of fluid is different, so it will have a different effect on the system. To make sure the system works as it should, the best thing to do is to keep using the brake fluid recommended by the manufacturer.
What kind of brake fluid does Acura use?
You’ll find formulations that are typically glycol-ether based, but you may also encounter silicone-based (DOT-5) and mineral oil-based (LHM) options.
Which is better DOT 3 or DOT 4 brake fluid?
The primary differences between the two include the following: DOT 3 brake fluid will absorb less water than DOT 4 from the air over time, meaning you’ll need to have your fluid changed less frequently. DOT 4 brake fluid has higher dry and wet boiling points, making it safer for higher temperatures.
