What brake fluid does 2009 Ford Flex take?

Brake Fluid for 2009 Ford Flex
The 2009 Ford Flex uses Prestone 32 ounce DOT 3 brake fluid. The brake fluid reservoir is located next to the battery along the driver side of the engine and has a clear with a black cap. You should pour in the fluid until it reaches the maximum amount indicated on the reservoir.
Remember to check the brake fluid level regularly, as low levels can trigger a warning in your vehicle. If the fluid is below the minimum line, carefully add brake fluid until it reaches just under the maximum line. It’s important not to overfill the reservoir, and always ensure the cap is clean before putting it back on.
Additionally, it’s advisable to discard bottles of brake fluid that are over a year old, as brake fluid can absorb moisture from the air, which can lead to rust in the brake lines. Brake fluid should be changed every 2 years or whenever it looks dark in color to ensure the longevity of the internal brake components.
If you have any further questions or need assistance with your 2009 Ford Flex, feel free to ask!

What type of brake fluid does Ford use?

DOT 4
Hydraulic fluid in DOT 4 quality for brake and clutch systems of motor vehicles.

What kind of brake fluid goes in a 2009 Ford Focus?

Prestone DOT 3 Brake Fluid 32 ounce
Max DOT 3.

Which is better 3 or DOT 4 brake fluid?

Compared to DOT 3, DOT 4 brake fluid has higher wet and dry boiling points, which yields better performance and higher braking temperatures and in high performance applications. Although DOT four is becoming more popular, you’re mainly going to see it in European nameplates.

Can you mix DOT 3 and DOT 4?

And Dot 4 are glycol ether-based fluids and the main difference lies in their boiling points DOT. 4 has a higher boiling point meaning it can handle higher temperatures without causing brake failure.

What kind of brake fluid does a Ford Flex take?

Prestone – DOT 3 Brake Fluid: MAX Synthetic, Highest Grade, Superior Protection, 100k miles, 32 oz (Part No. AS410)

What is the best transmission fluid for Ford Flex?

Motorcraft – MERCON® LV Automatic Transmission Fluid ATF, 1 Quart (Part No. XT10QLVC) The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

What type of oil does a 2009 Ford Flex take?

5W-20
Notes: Full synthetic. 5W-20. 5 quart.

Can I use DOT 3 instead of DOT 4?

Yes. DOT 3 brake fluid is compatible with DOT 4 brake fluid. However, DOT 4 offers a higher boiling point. DOT 5.1 is used in high-performance and heavy-duty applications due to its high boiling point.

Does it matter what brake fluid I put in my car?

Although DOT 3 and DOT 4 fluids are all glycol-based, the chemical composition of each type of fluid is different, so it will have a different effect on the system. To make sure the system works as it should, the best thing to do is to keep using the brake fluid recommended by the manufacturer.

Should I use DOT 3 or 4 brake fluid?

The primary differences between the two include the following: DOT 3 brake fluid will absorb less water than DOT 4 from the air over time, meaning you’ll need to have your fluid changed less frequently. DOT 4 brake fluid has higher dry and wet boiling points, making it safer for higher temperatures.