What bolt pattern is a Ford Taurus?

Ford Taurus Bolt Pattern
The bolt pattern for a Ford Taurus is 5×108 millimeters (5×4.25 inches).
This bolt pattern is common for vehicles like the Ford Taurus, Lincoln Continental, Ford Thunderbird, and others.

What bolt pattern do I need?

Another way to find your bolt pattern is to measure the distance from the center of one hole to the center of the diagonal hole. This measurement should be in millimeters. Once you have this measurement, you can compare it to a bolt pattern guide to determine your vehicle’s bolt pattern.

What is Ford’s 5 lug bolt pattern?

On the Ford Motor Company side (including Mercury and Lincoln), it also comes down to two common five lug bolt patterns, 5×4-1/2 and 5×5-1/2, although Ford did produce a few passenger cars with 5×5-inch bolt pattern.

What is the bolt pattern on a 2012 Ford Taurus?

This Factory OEM Ford rim comes equipped on a 2010-2012 Ford Taurus. This is an aluminum wheel with a diameter of 18″ and a width of 7″. This Ford Taurus wheel has 5 lug holes and a bolt pattern of 114.3mm.

Does Ford have a 5×5 bolt pattern?

Large Ford Pattern | 5 on 5.5 inches
Early Ford passenger cars use a 5×5. 5-inch bolt pattern, which can also be listed as 5×5-1/2 inches. Later, the 5×5.

Is 5×114 3 the same as 5×4?

The 5×114. 3 lug pattern, often referred to as 5×4. 5, is used mostly for older generation Jeep Wranglers (up to 2006), but is also common among other SUVs and cars, though offsets may need to run higher. Wheels available for this bolt pattern are numerous, so you will have a lot to choose from.

Is 5×4 5 the same as 5×114?

While the numbers are different, the wheels themselves feature the same exact bolt pattern. So if you’re on the hunt for 5×4. 5 wheels and someone says you really need a 5×114. 3, you’ll know that you’re both talking about the same thing.

What is the bolt pattern on a 2002 Ford Taurus?

Ford Taurus Bolt Pattern – Generations:

Generation	Production Years	Bolt pattern
III [1996 .. 1998]	1996-1998	5×108
IV [2000 .. 2007]	2000-2007	5×108
V [2008 .. 2009]	2008-2009	5×114.3
VI [2010 .. 2012]	2010-2012	5×114.3

What cars have a 5×114 3 bolt pattern?

The most popular cars with PCD 5×114,3 are: Honda Civic oraz Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3.

Is 5×4 5 the same as 5×114 3?

While the numbers are different, the wheels themselves feature the same exact bolt pattern. So if you’re on the hunt for 5×4. 5 wheels and someone says you really need a 5×114. 3, you’ll know that you’re both talking about the same thing.

What lug pattern is for Taurus?

Ford Taurus Bolt Pattern – Generations:

Generation	Production Years	Bolt pattern
VI Facelift [2013 .. 2019]	2013-2019	5×114.3
VII [2015 .. 2019]	2015-2019	5×108
VII Facelift [2019 .. 2022]	2019-2022	5×108
VIII [2022 .. 2025]	2022-2023	5×108