AHG Auto Service » Make » Ford » What bolt pattern is a Ford Crown Vic?

What bolt pattern is a Ford Crown Vic?

Ford Crown Victoria Bolt Pattern
The bolt pattern for a Ford Crown Victoria is 5×114.3. This means the vehicle has 5 lug holes and the diameter of the imaginary circle formed by the centers of these lug holes is 114.3 millimeters.
When considering aftermarket wheels for the Ford Crown Victoria, it’s important to ensure that the new wheels have the same bolt pattern to ensure proper fitment and safety.

What is a 5×114 3 bolt pattern?

A bolt circle of 5×114. 3 mm would indicate a 5 lug pattern on a circle with a diameter of 114.3mm (or 4.5″).

Is 5×114 3 the same as 5×4 5?

While the numbers are different, the wheels themselves feature the same exact bolt pattern. So if you’re on the hunt for 5×4. 5 wheels and someone says you really need a 5×114. 3, you’ll know that you’re both talking about the same thing.

What lug pattern is a 05 Crown Vic?

the 06 uses a 5×4. 5 bolt circle. the 05 uses the same 5×4.

What is the bolt pattern on a Crown Vic?

This Ford Passenger and Crown Victoria wheel has 5 lug holes and a bolt pattern of 114.3mm.

What size rims go on a Crown Vic?

Product information

Manufacturer ‎Road Ready Wheels
Offset ‎43 Millimeters
Pitch Circle Diameter ‎70.6 Millimeters
Wheel Backspacing ‎5.9 Millimeters
Rim Size 17 Inches

What size rims are on a 2004 Crown Victoria?

16-17″ diameter, 7″ width2004 Ford Crown Victoria / Wheel size

What’s the difference between a police crown Vic and a regular Crown Vic?

CVPIs have higher-rate coil springs, around 0.8 inches (20.3 mm) of additional ground clearance, and thinner rear anti-roll bars (shared with the LX Sport) than the Handling and Performance Package Crown Victorias; the base Crown Victoria, beginning in 2003.5, does not have a rear anti-roll bar.

What vehicles have 5×114 3 bolt pattern?

The most popular cars with PCD 5×114,3 are: Honda Civic oraz Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3.

Can I use 5 114.3 bolt pattern?

5×114.3, also known as 5×4.5 is a very common bolt pattern used on many Honda, Nissan, Infiniti, Lexus, Toyota, Hyundai, Ford, and more. 5×114.3 wheels are available in 14″, 15″, 16″, 17″, 18″, 19″ and 20″ diameters in a wide range of widths and offsets to fit just about any car, SUV or light truck on the road.

What does 5×114 3 bolt pattern?

A bolt circle of 5×114. 3 mm would indicate a 5 lug pattern on a circle with a diameter of 114.3mm (or 4.5″).

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment