Ford F-550 Axles
The Ford F-550 features specific axles for its front and rear suspension. Here are the details:
– Front Axle:
– Type: Solid Twin-Coil Monobeam axle (F-350 4×4, F-450/F-550/F-600)
– Max. Front GAWR: 7,500 lbs (F-450/F-550/F-600) *Standard on F-600, optional on F-450/F-550
– Springs: Coil
– Shock absorbers: Gas type
– Stabilizer bar: Standard
– Source:
– Rear Axle:
– Type: Solid axle
– Max. Rear GAWR: 15,500 lbs (F-600)
– Springs: Leaf
– Shock absorbers: Gas type
– Stabilizer bar: Standard
– Source:
These specifications provide an overview of the axles used in the Ford F-550, highlighting their capabilities and design features.
Contents
- Is a Ford F-550 considered a heavy duty truck?
- What is 3.73 axle ratio?
- What is a F-550 classified as?
- What Ford trucks have Dana axles?
- Which axle ratio is faster?
- What trucks have Dana 70 axles?
- What is the axle ratio for a 2008 F-550?
- How much weight can a Ford F-550 dump?
- What trucks came with Dana 60 axles?
- Is a F-550 a 2 ton truck?
Is a Ford F-550 considered a heavy duty truck?
Considered to be the most extreme of all trucks in its “F” series, Ford’s F-550 Severe Duty is a heavy-duty vehicle with impressive stability, traction, and ground clearance.
What is 3.73 axle ratio?
So if a truck has an axle ratio of 3.73:1 or 3.73, it means the driveshaft turns 3.73 times to spin the axle one full cycle. If the driveshaft makes more revolutions to rotate the wheels, the ratio is higher. A higher axle ratio implies higher engine power or torque.
What is a F-550 classified as?
Class 5—This class covers trucks with GVWRs from 16,001 to 19,500 pounds. There are still a few vehicles in this class that straddle the line between non-commercial and commercial use such as Ford’s F-550. However, this class is where more commercial vehicles emerge.
What Ford trucks have Dana axles?
Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4×4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts. These axles will also…
Which axle ratio is faster?
Performance: Looking again at the ratios used above, the higher 3.55 ratio indicates faster acceleration whether the truck’s empty or loaded. The higher the ratio, the more revolutions per minute. Towing: For pickup trucks released after 2010, the best axle ratio for towing falls somewhere between 3.55 and 3.73.
What trucks have Dana 70 axles?
The Dana 70 front drive axles used in the Chevrolet Kodiaks and GMC Topkicks also had these features. This axle was standard for the Big Three (automobile manufacturers) dual rear wheel trucks until 1985, when Ford started using the Sterling 10.25 rear axle.
What is the axle ratio for a 2008 F-550?
The 2008 f-450 and f-550 were available with 4.30:1 or 4.88:1 rear ratios.
How much weight can a Ford F-550 dump?
Whether you’re carrying sand, gravel, or other types of loose material, our F550 dump truck rental can handle the load. These trucks seat up to 3 passengers, have a payload capacity of 12,370 lbs and include towing capabilities.
What trucks came with Dana 60 axles?
- 1964–1977 Chevrolet and GMC 3/4-ton pickups.
- 1975–1987 Chevrolet and GMC 1-ton pickups and Suburbans.
- 1979–2012 Chevrolet and GMC 1-ton vans.
- 2002–2005 Chevrolet and GMC 1/2 + 3/4 Ton pickups and Suburbans with Quadrasteer.
Is a F-550 a 2 ton truck?
The Chevrolet Silverado/GMC Sierra 3500, Ford F-350, and Ram 3500 are known as “one ton” pickups. Similar schemes exist for vans and SUVs (e.g. a 1-ton Dodge Van or a 1⁄2-ton GMC Suburban), medium duty trucks (e.g. the 1 1⁄2-ton Ford F-550) and some military vehicles, like the ubiquitous deuce-and-a-half.
