What axles does a 2001 Dodge Ram 1500 have?

Axles of a 2001 Dodge Ram 1500
The 2001 Dodge Ram 1500 is equipped with the following axles:
Front Axle:
– The front axle of the 2001 Dodge Ram 1500 is a Dana 44 Series Axle. This axle is known for its strength, durability, and performance. It features thicker tubes for improved strength and rigidity, as well as redesigned and thicker brackets to resist bending and endure the off-road environment.
Rear Axle:
– The rear axle of the 2001 Dodge Ram 1500 is a Chrysler 9.25″ axle. This axle has a 9.25″ ring gear and is available with different gear ratios, such as 3.55, 3.92, and 4.10. It is also available with a locking differential.
In summary, the 2001 Dodge Ram 1500 is equipped with a Dana 44 Series Front Axle and a Chrysler 9.25″ Rear Axle.
If you need further assistance or have any other questions, feel free to ask!

Contents

What axle is in a 2000 Dodge Ram 1500?
What trucks have Dana 44 axles?
Does Ram use Dana axles?
What years did Dodge use Dana 60?
What trucks have Dana 70 axles?
What trucks came with Dana 60 axles?
What is the difference between a Dodge Dana 70 and 80?
What trucks have Dana 80 axles?
What year did Dodge stop using Dana axles?
What Dodge trucks have Dana 60 axles?

What axle is in a 2000 Dodge Ram 1500?

The Dana-Spicer, Model 44 216 Front Beam-Design Iron (FBI) axle was used on all 1994 to 2001 Ram 1500 4×4 1/2 Ton trucks and 1994-1997 gas V8 powered, light duty Ram 2500 trucks with Gross Vehicle Weights (GVW) under 8800 pounds.

What trucks have Dana 44 axles?

The Dana 44 has been manufactured for nearly 70 years, and was original equipment under Jeep, Ford, GM, Dodge, International Harvester and Studebaker vehicles, and even the Isuzu Rodeo and Honda Passport. And almost every one of these had some unique, funky specification just for that model.

Does Ram use Dana axles?

In addition to axles, Dana supplies cylinder head gaskets for the 2021 Ram 1500 TRX. Dana is a world leader in providing power-conveyance and energy-management solutions that are engineered to improve the efficiency, performance, and sustainability of light vehicles, commercial vehicles, and off-highway equipment.

What years did Dodge use Dana 60?

The Model 60 as used by Dodge from 1975 to 1993 has very durable greaseable king pins and disc brakes. The wheel bearings are serviceable and the dead-spindle configuration allows the use of lockout hubs.

What trucks have Dana 70 axles?

The Dana 70 front drive axles used in the Chevrolet Kodiaks and GMC Topkicks also had these features. This axle was standard for the Big Three (automobile manufacturers) dual rear wheel trucks until 1985, when Ford started using the Sterling 10.25 rear axle.

What trucks came with Dana 60 axles?

The Dana 60, a heavier-duty axle than the Dana 44, was first used in the 1950s. It was the axle of choice under countless Dodge, Ford, GM, Studebaker, IH and Jeep 3/4-ton and 1-ton fullsize trucks, as well as Ramchargers and Trail Dusters with the 440ci V-8, and some heavy-duty 1/2-ton Ford and IH trucks.

What is the difference between a Dodge Dana 70 and 80?

A Dana 80 has a ring gear diameter of 11.25 inches, the Dana 70 measures 10.50, and the 14-bolt measures 10.25. Why is ring gear diameter important? The larger the ring gear, the greater the contact area or engagement between the ring and the pinion and therefore the greater the torque capacity of the axle.

What trucks have Dana 80 axles?

Ford was the first company to use the Dana 80; it is used mostly in trucks with dual rear wheels with the exception being some Dodge 2500’s and select Ford F-350’s. The Dana 80 has a gross weight rating up to 11,000 lbs, however it is common practice among manufacturers to derate Dana 80’s.

What year did Dodge stop using Dana axles?

Class 3 trucks have been common users of the Dana 80 since it was first manufactured in 1988. Dodge used the axle selectively in class 2 trucks from 1994-2002. Ford has made use of the axle in class 4 trucks until 2005 when the Dana S 110 was phased in.