What axles are in a Ford Excursion?

The Ford Excursion is equipped with different axles depending on the model and year. Here is the information gathered from the search results:
Front Axle:
The front axle of the Ford Excursion is a Dana 50 axle. The Dana 50 axle consists of a Dana 44 differential in a Dana 60 housing with 30 spline axles.
Rear Axle:
The rear axle of the Ford Excursion varies depending on the model and year. Most Excursions are equipped with the Ford Sterling rear axle with a 10.5-inch ring gear. However, it is important to note that the rear axle information provided in the search results is not conclusive, and there may be variations in rear axle configurations for different Excursion models and years.
It’s worth mentioning that the production of the Dana 50 front axles ended when the Excursion was dropped by Ford at the end of the 2005 model year.
Please note that this information is based on the search results and may not cover all possible axle configurations for the Ford Excursion. For more specific and detailed information, it is recommended to consult the owner’s manual or contact a Ford dealership.
I hope this helps! Let me know if you have any other questions.

What front axle is in a 2005 Ford Excursion?

2000-2005 Ford Excursion 4x4s use Dana 50 monobeam front axles. Externally, the Model 50 Axle looks almost exactly like a Dana 60 used on most of the Super Duty 4x4s of the same vintage, however, all the internal differential components are substantially smaller.

What year Fords had a Dana 60?

During the 2001 model year, an SRW version of Dana 60 became available. By the start of the 2003 model year, the Dana 60 had completely replaced the Dana 50 in all F-Series Super Duty models although it did continue to be used for the Excursion SUV through 2005.

What trucks have Dana 80 axles?

Dana 80 Rear Axles have been in production since the 1988 Model Year. They have been used in Chevy/GMC 1992-2002 , Dodge(1994-2002), and Ford (1988-current) trucks vans, and motorhome chassis.

What front axle is in a 2000 Ford Excursion?

The Excursion come from the factory with a Dana 50.

What truck has a Dana 80?

ID A Dana 80 Rear Axle in Chevy, Dodge Ram, or Ford Truck IDN-126. Dana 80 Rear Axles have been in production since the 1988 Model Year. They have been used in Chevy/GMC 1992-2002 , Dodge(1994-2002), and Ford (1988-current) trucks vans, and motorhome chassis.

Does Ford use Dana axles?

With a throwback to the past, the 2023+ Ford Super Duty F-250 and F-350 come equipped with the Dana Advantek M235 (Dana 50) front axle in high pinion configuration.

What axles does a Ford Excursion have?

The rear axle for all Excursions was a Sterling 10.5 axle. The four-wheel-drive models were equipped with a NV273 transfer case and Dana 50 front axle.

What trucks have Dana 60 axles?

The Dana 60, a heavier-duty axle than the Dana 44, was first used in the 1950s. It was the axle of choice under countless Dodge, Ford, GM, Studebaker, IH and Jeep 3/4-ton and 1-ton fullsize trucks, as well as Ramchargers and Trail Dusters with the 440ci V-8, and some heavy-duty 1/2-ton Ford and IH trucks.

What years did Ford use Dana 60?

2005-2016 Ford Dana Super 60 Front Axle Identification IDN-118. Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4×4 trucks.

What Ford trucks have Dana axles?

Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4×4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts. These axles will also…