What are the specs of the Ford Bronco lug nuts?

Ford Bronco Lug Nuts Specifications
The lug nuts for the Ford Bronco have specific specifications that are important to consider for maintenance and replacement. Based on the search results, the lug nuts for the Ford Bronco are M12 in size, which corresponds to a 19mm wrench size. It is important to note that when tightening the lug nuts, it is crucial to ensure proper torque to avoid over-tightening, which can lead to stud stretching and potential failure around the rotor.
When it comes to torque specifications, it is recommended to use a torque wrench to torque every 2022 Ford Bronco lug nut to the recommended specifications. The torque specs for M12x1.5 2023 Ford Bronco lug nuts are in the range of 110-130NM, with a reference of 113NM (83.3 Ft-lb). This is crucial to ensure that there is no damage caused by over-torquing or under-torquing the lug nuts, as both scenarios can be very dangerous.
In summary, the lug nuts for the Ford Bronco are M12 in size, requiring a 19mm wrench, and the recommended torque specifications for M12x1.5 lug nuts are in the range of 110-130NM, with a reference of 113NM (83.3 Ft-lb). These specifications are essential for maintaining the safety and performance of the vehicle’s wheel assembly.

How much torque does the new Bronco have?

1.5L EcoBoost® Engine with Auto Start-Stop Technology: Comes standard on Base, Big Bend™, Heritage, and Outer Banks™ trims. When coupled with an 8-Speed Automatic Transmission and Electric Power-Assisted Steering (EPAS), this engine can deliver 181 horsepower and 190 lb. -ft. of torque.

What size socket for Ford Bronco lug nuts?

Stock lugs are a M12 AKA 19mm. I use a 19mm socket on my impact for my recovery gear set & it fits like a glove. Cheers!

Are most lug nuts metric or standard?

Lug nuts can come in both metric and standard (imperial) sizes, depending on the make and model of the vehicle. It is important to use the correct size of lug nuts for your specific vehicle to ensure proper fitment and safety.

What is the torque on the Ford Bronco lug nuts?

The REFERENCE torque spec for lug nuts on a 2021-2024 Ford Bronco Big Bend/ Black Diamond/ Outer Banks/ Badlands/ Heritage Edition/ Wildtrak/ Everglades/ Heritage Limited Edition will be 113 – 135 NM.

What size are Ford lug nuts?

What Size Are Ford F150 Lug Nuts?

Models	Thread Size	Torque spec
FORD F-150 XIV [2021 .. 2023]5.2 SC	M14 x 2.0	204 Nm
FORD F-150 XIII (P552) FACELIFT [2018 .. 2020]2.7 GTDI	M14 x 1.5	204 Nm
FORD F-150 XIII (P552) FACELIFT [2018 .. 2020]3.0 TD	M14 x 1.5	204 Nm
FORD F-150 XIII (P552) FACELIFT [2018 .. 2020]3.3 TI-VCT	M14 x 1.5	204 Nm

What size are factory lug nuts?

Vehicle wheel stud common thread diameter is either 3/8 inch or 10mm. Some 10mm threads are 10×1. 5 and others 10×1. 25.

What size are the lug nuts on the 2024 Ford Bronco?

They fit your Bronco’s wheel studs to a tee but remember to apply only the appropriate torque to prevent stripping the threads. Application. This Black Factory Style 3/4-Inch M12x1. 5 Lug Nuts in Set of 24 fits all 2021-2024 Ford Bronco, Excluding Raptor Models.

Does Ford use metric or standard lug nuts?

Almost all Ford lug nuts are metric. The most common metric thread sizes of Ford wheel nuts are M14x1.

What is the lug nut spec?

Most vehicles have lug nuts that require around 100 pound-feet of torque, but some vehicles require more or less. It’s best to check your vehicle’s manual to find out the exact specifications you need. You should properly torque your lug nuts when installing new wheels and after driving 50 to 100 miles on new wheels.

What torque wrench for lug nuts?

1/2 -Inch Torque Wrench
This torque range has a wide range going from 30 to 250 foot-pounds of torque. It is the best tool if you are working with lug nuts or anywhere on the vehicle suspension. It is suitable for large bolts and nuts like those in engine mounts.