The Ford Bronco is equipped with auxiliary switches that allow owners to easily hook up their lights, radios, or any other electrical devices they deem necessary. The switches are located above the driver’s head and are labeled AUX 1 through AUX 6. These switches are connected to a power distribution box in the engine compartment, which has five circuits that run to different parts of the Bronco vehicle. Each circuit is individually fused for connection of electrical accessories. When a switch is turned on, the indicator light on the switch illuminates, and the circuit provides power to the device wired to that switch.
The auxiliary switches on the Ford Bronco make aftermarket customization easier, allowing owners to control light bars, pod lights, or even an in-Bronco refrigerator. The switches are prewired and connected to the power distribution box, reducing the amount of tear-down required when installing accessories. The Bronco also has pre-run wiring in hard-to-reach places, further simplifying the installation process.
The factory-installed auxiliary switches are standard on the Wildtrak, First Edition, Badlands, and Black Diamond trim levels of the Bronco, and they are optional on the Base and Outer Banks versions . The switches are located overhead for easy access, similar to their location on current F-Series trucks.
In addition to the typical uses for auxiliary switches, such as connecting lights or radios, Bronco owners have come up with various creative ideas for utilizing these switches. Some examples include running a mini fridge, winches, or even setting up a switch that sprays water in the passenger’s face as a playful prank.
Please note that the information provided is based on search results and may vary depending on the specific model and year of the Ford Bronco. For more detailed information, it is recommended to refer to the owner’s manual or consult with a Ford dealership.
Contents
- What are Ford Upfitter switches used for?
- What is the purpose of the auxiliary switch?
- What are 3 position switches for?
- What is the auxiliary switch on an actuator?
- What is a Ford Upfitter relay?
- What are the aux switches for in the Ford Ranger?
- How do you play aux in a Ford?
- What are the aux switches for in Fords?
- What is auxiliary switch in damper actuator?
- Where is the aux port in a Ford?
What are Ford Upfitter switches used for?
Upfitter switches are also called auxiliary switches, and they’re essentially switches that allow drivers to turn on various features on their trucks. Upfitter switches are typically used to control truck accessories like flood lights, snow plows, and winches, among other features.
What is the purpose of the auxiliary switch?
Auxiliary switches provide remote electrical indication if the circuit breaker is open or closed. They are provided as two-switch combinations, with a maximum of two two-switch combinations for the NF frame and six two-switch combinations for the RF frame.
What are 3 position switches for?
The 3-position enabling switch (hereinafter referred to as “enabling switch”) is effective for ensuring safety in such situations. Enabling switches are built into portable control devices, such as robot teaching pendants, to allow manual operation of the machine by a human using the enabling switch.
What is the auxiliary switch on an actuator?
If you have purchased a motorized damper or shutter, the actuator will be equipped with an adjustable auxiliary switch. This switch can be used to indicate the damper po- sition or to interface with additional controls or equipment, such as a starter relay or variable frequency drive (VFD).
What is a Ford Upfitter relay?
The Ford Upfitter Switches are optional instrument panel mount switches (Option Code 66S) that control passenger side mounted relays. These relays power four blunt cut wires that are taped on a harness near the relay pack that can be found beneath the instrument panel and to the left of the steering column.
What are the aux switches for in the Ford Ranger?
This optional roof mounted switch bank7 runs 6 switches via an auxiliary fuse box allowing you to seamlessly control accessories such as light bars, winches and air compressors from the comfort of the driver’s seat.
How do you play aux in a Ford?
What have you anyway it’s been monkey films thanks for watching. This is how to plug in your auxilary. Input. Into a 2016 Ford Fiesta.
What are the aux switches for in Fords?
When switched on, the auxiliary switches provide electrical battery power for a variety of personal or commercial uses. Switches 1 through 4 provide 25 amps. Switches 5 and 6 provide 40 amps. The relay box for the auxiliary switches is in the rear of the engine compartment, near the back wall.
What is auxiliary switch in damper actuator?
Application The auxiliary switch unit is used for signaling the position or for exercising switching functions in any given angle setting. Simple direct mounting The auxiliary switches are attached directly by the shaft clamp (damper actuators) or on the position indication (rotary actuators).
Where is the aux port in a Ford?
The port can usually be found in the glove compartment or centre console of the vehicle. This feature requires the use of a cable with 3.5 mm jack plug, which should be attached to the connector in the glove compartment or centre console and to the headphone socket on the connected device.
