What are Ford Upfitter switches?

Ford Upfitter Switches
Ford Upfitter switches are a feature found in certain Ford trucks, such as the Ford F-250. These switches are designed to control various truck accessories and upgrades, allowing owners to easily add and operate devices without the need for aftermarket upfitter switches.
Here are some key points about Ford Upfitter switches:
1. Function: Upfitter switches are typically used to control truck accessories like flood lights, snow plows, winches, and other features.
2. Location: In Ford trucks, the Upfitter switches are usually located on the overhead console or instrument panel.
3. Numbering and Power Rating: Each Upfitter switch is numbered and has a fuse that determines the amount of power it can deliver to a connected device. For example, in the 2020 Ford F-250, the first four switches are rated for 25 amps, while the last two are rated for 40 amps.
4. Operation: The Upfitter switches are operational when the ignition key is in the RUN or ACCY positions. The power to the switches is relay controlled and is designed to operate in the RUN mode to reduce the possibility of draining the battery.
5. Wiring and Fuses: The switches are connected to the power distribution box, and each circuit is individually fused for the connection of electrical accessories .
6. Customization: The Upfitter switches provide a convenient way for truck owners to customize their vehicles with additional accessories and upgrades.
It’s important to note that the specific features and capabilities of Ford Upfitter switches may vary depending on the model and year of the Ford truck. For more detailed information, it’s recommended to consult the owner’s manual or reach out to a Ford dealership.
I hope this information helps! Let me know if you have any other questions.

What is a Ford Upfitter relay?

The Ford Upfitter Switches are optional instrument panel mount switches (Option Code 66S) that control passenger side mounted relays. These relays power four blunt cut wires that are taped on a harness near the relay pack that can be found beneath the instrument panel and to the left of the steering column.

What is the Upfitter package on Ford Transit?

The Ford Transit can be ordered with the optional Auxiliary Upfitter Switches, which are located on the center console between the driver and passenger seat. Each Upfitter Switch can provide a 12V output to an auxiliary load, such as Air Lift Spring Kit Compressor, an exterior LED bar, etc.

What’s an Upfitter?

: an assembly line worker who installs door handles and other hardware in automobile bodies.

What is Ford Upfitter interface module?

Introduction. The Upfitter Interface Module. ® provides access to a broad range of vehicle data such as MPH, RPM, Park. Brake, Service Brake, temperatures, transmission range, accelerator pedal, doors, lights, door locks, ABS, MIL, etc.

What are the auxiliary switches f250 used for?

When switched on, the auxiliary switches provide electrical battery power for a variety of personal or commercial uses. Switches 1 through 4 provide 25 amps. Switches 5 and 6 provide 40 amps. The relay box for the auxiliary switches is in the rear of the engine compartment, near the back wall.

How does an auxiliary switch work?

Function The auxiliary switch works in the same way as the main contacts. The signal contact only operates when the protective device trips. This can be simulated with the white test button. Each time the signal contact is tripped, it must be reset to its starting position using the orange-coloured reset button.

What does aux switch mean?

: an electrical switch actuated by a main device (such as a circuit breaker) for signaling or interlocking.

What is Ford Upfit integration system?

Vehicle Integration System 2.0
An available UIS makes it easy for upfitters to create custom buttons in the truck’s center display so operators can control added equipment like sirens, lights, or even a snow plow from the comforts of the SYNC® 4 27 screen.

What are the Upfitter switches used for?

Aux lights, emergency lights (fire/ems), high idle switch, on/off switch for an air compressor, power switch of a winch; the uses are innumerable.

What is an Upfitter in a truck?

An upfit is a set of vehicle accessories or augmentations for an existing vehicle that are customized to the worker’s needs. Upfits can include shelving, roof units, cooling units, hangars, and more.