Is the Ford 360 engine good?

Is the Ford 360 Engine Good?
The Ford 360 engine has received mixed reviews, with some considering it a good truck engine and others expressing disappointment in its performance. Here are some key points from the search results:
– The 360 engine was considered a “dog” when compared to the 390, but it was still regarded as a pretty good truck engine, known for its strong pulling power, although it was noted to be a gas hog and not a fast revver.
– Some individuals were extremely disappointed in the 360, citing issues with underpowered performance and worse efficiency compared to the 302 at the time.
– The Ford 360 engine was introduced in 1968 as the latest FE V8 engine to power Ford trucks and remains popular among truck enthusiasts for its quality and performance.
Overall, opinions on the Ford 360 engine vary, with some praising its performance as a truck engine and others expressing disappointment in its power and efficiency.
If you have any further questions or need additional information, feel free to ask!

How much HP can a 360 handle?

The short-block as built here could handle significantly more if needed (proper ring gap aside), and 600 hp would certainly be a safe number for this short-block.

Can you turn a Ford 360 into a 390?

360’s and 352’s use a longer skinnier rod than 390’s (and other FE’s). I repeat, if you want to convert a 360 to a 390 the correct way to do it is to replace the crank, rods, and pistons.

What is the difference between a Ford 360 and 390?

The 360ci engine is a close cousin of the 390 but was available only for pickup trucks through 1976. The 390 has a 4.05-inch bore with a 3.78-inch stroke. The 360 was little more than a 390 block (4.05-inch bore) with a 352 crank (3.50-inch stroke) to achieve 360 cubic inches.

When did Ford stop making the 360?

The 361/360, of 360.8 cu in (5.9 L) actual displacement, was introduced in 1968 and phased out at the end of the 1976-year run; it was used in the Ford F Series trucks and pickups.

What is Ford’s most reliable engine?

10 Most Reliable Ford Engines Ever Built

• 8 EcoBoost Family.
• 7 Boss 429.
• 6 428 Cobra Jet.
• 5 Flathead V8.
• 4 427 Big Block V8.
• 3 Boss 302.
• 2 5.0 EFI High Output.
• 1 5.0 Coyote V8.

How much horsepower does a Ford 360 engine have?

What are the specs of the Ford 360 engine? The Ford 360 engine is a V8 engine created between 1968 and 1971 with two barrels had 215 horsepower at 4,400 rpm and a max torque of 327 at 2,400 rpm. The later model, which ran from 1972 until 1975, had 196 horsepower at 4,000 rpm and 327 max torque.

Which Ford engine lasts the longest?

Diesel engines.
Ford trucks and SUVs with diesel engines will last much longer than their gasoline counterparts. Diesel engines are known for their longevity, frequently surpassing 400,000 miles. There are even reports of a Ford diesel engine making it to 1 million miles.

What years did they make the Ford 360 engine?

360 Truck. The 361/360, of 360.8 cu in (5.9 L) actual displacement, was introduced in 1968 and phased out at the end of the 1976-year run; it was used in the Ford F Series trucks and pickups.

What was Ford’s best big block?

Ford’s most popular, longest-lasting big block V8 engine lived an incredibly varied life. The 460 cubic inch eight-cylinder motor debuted all the way back in 1968 but found itself powering cars, trucks, and commercial equipment all the way to the end of the 1990s during its three decade run.

Is a 360 Ford engine a big block?

Is a 360 Ford a big block? – Quora. Yes it is, although the typical Ford produced ~5-5.8l units were small blocks the FE 360 is actually a standard FE 390 (6.4l) big block engine block using a destroked crank from the 352.