The rear end width of a 1956 Chevy truck can vary depending on the specific setup and modifications. However, based on the information from the search results, it appears that the rear end width for a 1956 Chevy truck typically ranges from approximately 55.5 inches to 66 inches. Here are some specific details from the search results:
– One user mentioned that they have an 89 Trans Am rear end under their 1958 truck, which is 66” wide with disc brakes.
– Another user stated that they need about 55.5″ to 56″ overall width for their rear end, with specific wheel and backspacing requirements.
– Additionally, there is a mention of an 80 Trans Am disk brake rear in a 1957 truck, with wheels that have four-inch backspacing and are perfectly centered between the fender and bed, suggesting a width of 62 inches flange to flange.
It’s important to note that these measurements are based on specific setups and modifications, so the actual rear end width can vary. If you have a specific setup or modification in mind, it’s recommended to consult with a professional or specialist to determine the most suitable rear end width for your 1956 Chevy truck.
Contents
- How wide is a 1957 Chevy rear end?
- Are all GM 12 bolt rear ends the same?
- How wide is a 1953 belair rear end?
- How wide is a 12 bolt Chevy rear end?
- How wide is a 1965 C10 rear end?
- What is the width of the rear axle on a 47 54 Chevy truck?
- How wide is the rear end of a 55 Chevy truck?
- How wide is the rear axle on a 1954 Chevy truck?
- How wide is a 1959 Chevy truck?
- What is the width of the rear end of a 1953 Chevy?
How wide is a 1957 Chevy rear end?
60 inches
Products specifications
| Vehicle Fitment | 55-57 Chevy Tri-5 (120, 210, Bel Air and Delray ) Call for Station Wagons, Nomad and Sedan Delivery |
|---|---|
| Brake Space | 2.5 inches (axle standoff) |
| Width | 60 inches (between wheel mounting surfaces) |
| Oil Capacity | 3 quarts of 85w-140, non-synthetic (API GL-6 rated only) |
Are all GM 12 bolt rear ends the same?
A different 12-bolt differential was used for light truck applications, but those 12-bolt units are not directly interchangeable. You can identify a truck differential by the smaller, 1.438-inch diameter pinion shaft and the size of the rear cover, measuring 10.875 inches by 10.875 inches.
How wide is a 1953 belair rear end?
Rear end width is 60″, not counting fractions of an inch, if any. Measurement is drum to drum, where wheel mounts to drum surface.
How wide is a 12 bolt Chevy rear end?
12 bolt rear end width
| Outside Width | Year | Model |
|---|---|---|
| 60.00 | 1955-1964 | Chevy Car |
| 60.00 | 1967-1969 | Camaro |
| 60.25 | 1968-1979 | Chevy II/Nova |
| 60.50 | 1984-1995 | Corvette |
How wide is a 1965 C10 rear end?
Re: 1965 C-10 rearend width backing plate ==> backing plate
The width of a C10 12 bolt from ’63 to early ’70 is 62″ WMS to WMS. From late ’70 thru ’87 the width increased to 63.5″ WMS to WMS. The 12 bolt truck differential can hold up to a lot of hp/tq when built right.
What is the width of the rear axle on a 47 54 Chevy truck?
Standard width is 60″ Axle Flange to Axle Flange but custom widths are available.
How wide is the rear end of a 55 Chevy truck?
55-57 Chevy is 60-1/4″. The Camaro will kind of work but it will require 1″ more backspacing on the wheels.
How wide is the rear axle on a 1954 Chevy truck?
The rear axle width is 62-3/8″ from wheel mount to wheel mount.
How wide is a 1959 Chevy truck?
bodies in lengths of 78″ or 98″ (and a full 6′ in width) provide up to 75.6 cubic feet of load space. And you get 4-wheel drive with Fleetside models 3184 and 3684. GOOD LOOKER, WILLING WORKER-that’s the 1959 Chevrolet Fleetside pickup.
What is the width of the rear end of a 1953 Chevy?
Rear end width is 60″, not counting fractions of an inch, if any. Measurement is drum to drum, where wheel mounts to drum surface.
