AHG Auto Service » Make » Chevrolet » How wide is the leaf spring on a Chevy s10?

How wide is the leaf spring on a Chevy s10?

The leaf spring on a Chevy S10 is approximately 2-1/2″ wide.

How do I measure my leaf springs?

The right way on how to measure a leaf spring. We do not measure I to I because as the spring arch changes. So will that distance. The right way is to measure from the center bolt following the curve

How wide is the rear leaf spring on a S10?

2 1/2″
Chevy GMC – S-10 Pickup ZR2 – Leaf Spring (Rear, 4 Leaves)

OEM Number(s) 15996781
Location on Vehicle Rear
Width 2 1/2″
(A) Short End Length 25 13/32″
(B) Long End Length 28 19/32″

How do you measure spring width?

Outer diameter is measured by placing your dial calipers on the outside of the coil’s width. Inner diameter is defined as the width of the inside of a coil spring’s diameter measured from the center of the helix. Sometimes, inner diameter can be difficult to measure accurately.

What is the width of a leaf spring?

On most leaf springs, the width is between 2.5 inches and 3.0 inches. Whereas the length of leaf springs correlates to the measurements of a vehicle’s rear-axle suspension, the width is an indicator of the shock absorption needs of a given vehicle.

How do you find the width of a leaf?

Leaf width (W) corresponds to the longest extension of any two points on the blade edge perpendicular to the leaf length axis, that is the axes connecting leaf apex and base (Shi et al., 2019a; see Fig. 1 for examples). Fig. 1.

Can I put bigger leaf springs on my truck?

By adding an additional long, full-size leaf to the existing leaf stack or by adding an extra leaf to each rear leaf spring, you can increase the load capacity and raise the height of the vehicle up to a few inches. If your truck is sagging in the back, you know you need to bolster its carrying capacity.

What year S10 has a 8.5 rear end?

Out. If you have a pickup or a two-door blazer. And it has the l35 4.3. And a manual transmission it has an eight and a half inch rear.

How wide is the front leaf spring on a k10?

2 3/4″
Chevy GMC – K10/20/30 / K5 Blazer / Jimmy – Leaf Spring (Front, 3 Leaves)

OEM Number(s) 460354
Location on Vehicle Front
Width 2 3/4″
(A) Short End Length 23 1/2″
(B) Long End Length 23 1/2″

What is the width of the rear end of a Chevy S10?

S10 2WD’s have a drum to drum mounting width of 54.5″ which is perfect for a T-Bucket with larger back wheels. The Blazer and 4WD models have about 4.5-5″ more overall width and works well for 26 and newer fender-less roadsters, and 23 style T’s with narrower rear wheels.

How wide are Chevy leaf springs?

CHEVROLET AND GMC SILVERADO, SIERRA PICKUP AND CAB CHASSIS LEAF SPRINGS

Body Style/Model Remarks Width
1/2 & 3/4 Truck 52″ long 2-1/2
1/2 & 3/4 Truck 52″ long 2-1/2
K10/1500, V10/1500, K20/2500 V20/2500 K30/3500 V30/3500 2-3/4
K10/1500, V10/1500, K20/2500 V20/2500 K30/3500 V30/3500 (1977-87) 2-3/4
AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment