The front axle on a 2005 Ford Dana 60 is approximately 84.74 inches wide. This axle was specifically designed for the 2005 and newer F-450 and F-550 Super Duty trucks, with a gross axle weight rating (GAWR) of 7,000 pounds and the ability to handle more than 600 lb-ft of engine torque.
Please note that the Dana 60 axle has been used in various Ford models since 1955 and continues to be used in some heavy-duty applications. It is important to verify the specific axle measurements for the 2005 Ford Dana 60 in question to ensure accuracy.
I hope this information helps! Let me know if you have any other questions.
Contents
- What is the diameter of a Ford Dana 60 front axle tube?
- What is the diameter of the axle tube on a 2005 Ford Dana 60?
- How wide is a Ford Dana 60 front axle?
- How to tell the difference between a Dana 60 and a Super 60?
- What Ford trucks came with a Dana 60 front axle?
- What size is the Dana 60 diff?
- How wide is a superduty front axle?
- Are all Dana 60 front axles the same?
- How do I identify my Ford Dana 60 front axle?
- What front axle is in a 2005 F250?
What is the diameter of a Ford Dana 60 front axle tube?
A 1-ton Dana 60 axlehousing typically has at least 3.125-inch, 0.313-inch-wall axletubes (lower right). Aftermarket 60 housings can be reinforced even further with 0.500-inch-wall tubing (lower left) or by massive 3.75-inch, 0.3125-inch-wall tubing (not pictured).
What is the diameter of the axle tube on a 2005 Ford Dana 60?
Yes, the superduty housings have 3.5″ thinwall tubes. The 99 and newer duallies had a Dana 60 and so did the 2002 and newer SRW 350’s.
How wide is a Ford Dana 60 front axle?
The 84.74-inch-wide axle (an F-350 front axle is 69.8 inches wide) was designed for the ’05-and newer F-450 and F-550 Super Dutys, where it’s rated to support 7,000 pounds of gross axle weight (GAWR) and cope with more than 600 lb-ft of engine torque.
How to tell the difference between a Dana 60 and a Super 60?
The Dana Super 60 is an upgraded version of the Dana 60 axle. Differences in the Dana Super 60 versus the regular Dana 60: Larger and thicker diameter steel tubes (3.75 inches diameter and ½ in thick) Larger ring and pinion which increase the contact area and overall strength.
What Ford trucks came with a Dana 60 front axle?
Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4×4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts.
What size is the Dana 60 diff?
Measure Your Axle
Although the Dana 44 and Dana 60 differential covers look similar, their sizes are significantly different. The Dana 44 differential cover will measure about 9 1/2 inches wide and 10 1/2 inches tall, while the Dana 60 differential cover will measure about 11 1/4 inches wide and 12 inches tall.
How wide is a superduty front axle?
The 84.74-inch-wide axle (an F-350 front axle is 69.8 inches wide) was designed for the ’05-and newer F-450 and F-550 Super Dutys, where it’s rated to support 7,000 pounds of gross axle weight (GAWR) and cope with more than 600 lb-ft of engine torque.
Are all Dana 60 front axles the same?
There are three major variations of the Dana 60 axle used in the 1960s to 1980s. GMC, Chevy, and Jeep are all basically the same. Dodge and Ford are different.
How do I identify my Ford Dana 60 front axle?
To find the complete build details of any Dana 60 axle, locate the BOM number stamped into the long axle tube and then find that code in the table below. Then, to find parts compatible with that axle, click on the link in the right column that will take you to the corresponding AxleBuilder.com page.
What front axle is in a 2005 F250?
Dana Super 60 Front
Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4×4 trucks.
