How wide are Toyota straight axles?

Toyota Straight Axle Widths
The width of Toyota straight axles varies depending on the specific model and year. Here are some key width measurements for Toyota straight axles:
– Front Axle Width:
– For Toyota trucks and 4Runners, there is one front axle width, and it is not wide. This can be solved with spacers, IFS hub swap, aftermarket axle housing, or an FJ80 front axle.
– The late model axle housings are 58 inches wide and have a larger 80 mm (~3.15 inch) axle tubes.
– Stock Toyota front axle measurements for comparison:
– 55.5″ wide, 29″ spring perch centers, ’79-85 Toyota trucks and 4Runners, SA Hubs
– 58.25″ wide, 29″ spring perch centers, ’79-85 Toyota trucks and 4Runners, IFS Hubs
– ’86-95 IFS front end is about 58.5″ wide
– ’93-98 T100 IFS front end is about 65″ wide.
– Rear Axle Width:
– Land Cruiser rear axles are all offset to the passenger side. Minis and 4Runners have a front passenger offset and are centered in the rear.
– Rear axle widths for different models include:
– 55″ wide, ’79-85 4wd trucks/4runners – 6 Lug
– 58″ wide, ’86-95 4wd trucks/4runners – 6 Lug
– 56″ wide, ’79-95 2wd Trucks – 5 Lug
– 60.75″ wide, ‘95.5-up Tacomas/4runners
– 66.75″ wide, ’93-98 T100 trucks.
These measurements provide a general overview of the width of Toyota straight axles, but it’s important to note that there may be variations based on specific models and configurations.

How wide is a Toyota T100 rear axle?

The stock rear width is 58″, but a T100 stock width is 66.75″.

How wide are the axles on a 85 Toyota pickup?

Toyota used a solid front axle in the ’79-’85 pickups and 4Runners. All of these axles were 55.5 inches wide from wheel mounting surface (WMS) to wheel mounting surface and came with solid front disc brakes and closed knuckles with Birfields.

What is the width of the rear axle on a 2004 Toyota 4runner?

The 3rd gen 4runner rear axle width is 59.5″ WMF to WMF (wheel mounting flange).

How wide is a Dana 27 axle?

It showed up under the front of military Jeeps in the early ’40s and ran in Jeeps until it was replaced by the Dana 27 (shown) for the ’66 model year. The Dana 27 ran until AMC came in for ’72. Both are of a closed-knuckle design and feature drum brakes. They are 51 inches wide and they have a 7¾-inch ring gear.

How wide is a 1984 Toyota pickup?

66 in
Dimensions

Maximum Seating	4 seats
Wheelbase	121.5 in
Length	193 in
Width	66 in
Height	61 in

How wide is a Dana 44 axle?

60 3/4 inches wide
TheseDana 44s are an almost perfect swap for the rear of any TJ, YJ, XJ, ZJ, WJ, or even a KJ. At 60 3/4 inches wide, this axle is almost the same width as a TJ (61 1/2 inches, wheel-mounting surface to wheel-mounting surface). They are commonly found with Trac-Lok limited slips and either 4.30 or 4.56 gears.

How wide is a Toyota front axle?

Toyota Axle Widths

Vehicle models	Front or Rear	Width, WMS to WMS
Toyota Tacoma and 4Runner	Rear axle	65″
Toyota Land Cruiser FJ40/FJ45/FJ55	Front axle	55.7″
Rear axle	55.6″
Toyota Land Cruiser FJ60 and FJ62	Front axle	58.9″

What size axle is a Toyota T100?

Axle Details
The Toyota 8.4″ axle, also known as the Toyota 8.4″ T100, Tacoma, or Tundra rear axles, features a drop out style 3rd member. Although it is called a Toyota 8.4″ axle, the ring gear is actually 8.25″ in diameter.

How wide is a 90 Toyota pickup?

Used 1990 Toyota Pickup – Specs & Features

Dimensions
Length	193.1 in.
Overall width without mirrors	66.5 in.
Height	61.0 in.
Wheelbase	121.5 in.

What is the width of the axle on a 2nd Gen Tacoma?

Further as extending your wheel base or axle width on the fabtech. FYI: 1st gen tacoma have a 60.75 rear and 2nd gen is 65. You can make a 2nd gen axle work if you relocate the perch.