How to replace Subaru Impreza license plate lights?

Replacing Subaru Impreza License Plate Lights
To replace the license plate lights on a Subaru Impreza, you can follow these steps:
1. Insert a finger into the right side of the license plate light cover.
2. Press the cover once to the left.
3. Pull out the cover to remove it.
Once the cover is removed, you can access the license plate light bulb. You can then replace the bulb with a compatible one. If you prefer, you can also consider upgrading to LED bulbs for a brighter and more modern appearance.
Please note that it’s always a good idea to consult the vehicle’s owner’s manual for specific instructions and safety precautions before attempting any maintenance or repair tasks.
I hope this helps! Let me know if you have any other questions.

Can I change my own tag light?

Replacing your car’s tail light bulbs is a simple and straightforward procedure. The rear light bulbs are usually housed in a single unit that’s easy to access from inside the boot. Haynes has full step-by-step information on how to do this. Most tail light bulbs are filled with halogen gas, and are readily available.

How do you change a license plate light on a 2016 Subaru Crosstrek?

So I’m gonna push them to the inside. And lift up at the same time with your fingers. Okay guide them out of the tailgate. So what you’re doing.

How do you change a license plate light on a 2016 Subaru Impreza?

Here these are 168s is what this light bulb is that goes in there. So you just get a new 168. And be able to install.

Is it easy to change a number plate bulb?

Grab the light bulbs with your fingers, and pull them straight out of the bases to remove them. If the light bulbs don’t come out easily, look for plastic or metal tabs holding them in place. Hold the tabs down with your finger or a screwdriver while you pull the light bulbs out.

How do you remove number plate lights?

Put it here in this latch. And just pull it out you don’t have to unscrew. Anything this is the way to pull it out and replace the bulb. After that once you replaced. It just push it back into place.

How do you change a LED license plate light?

Then just turned the light housing counterclockwise to release it. Then you’re able to pull out your old bulb. And install your new bulb. Then you can reinstall your lighthousing.

Will AutoZone replace tail light bulb?

While AutoZone doesn’t offer actual brake light replacement services, our team can assist you with any questions about the process, help you find the right products to get started, and maybe even give you a hand. How do you remove a brake light to replace it?

What color is the license plate light?

white light
A license plate light is required on the rear of a vehicle. A tail lamp or a separate lamp must illuminate the rear registration plate with a white light and render it clearly legible from a distance of fifty feet.

Does an LED license plate light need a resistor?

The reason: The amount of light from the LED is proportional to the current going though it. That is what you want to control. But the voltage across an LED changes by age, by temperature, and by each individual LED. So if you don’t put a resistor in series with it, then some LEDs will be too bright and burn out.

Will AutoZone change my turn signal bulb?

Sure, as long as you purchase the bulb from us and we assess the difficulty. If it’s too difficult we will not be able to change it. Although some sales reps are confident enough to try. Just ask us to have a look and we’ll see what we can do!