How to replace serpentine belt on 2009 Dodge Ram 1500?

Replacing the Serpentine Belt on a 2009 Dodge Ram 1500
To replace the serpentine belt on a 2009 Dodge Ram 1500, you can follow these general steps:
1. Prepare for the Replacement:
– Turn off the engine and set the parking brake.
– Pull the hood release handle and open the hood.
– Disconnect the battery for safety reasons.
2. Document the Belt Path:
– Before replacing the serpentine belt, take a picture or draw its path around the pulleys to guide you later.
3. Replace the Belt:
– Once you have prepared and documented the belt path, you can proceed with the replacement process. The specific steps for removing and replacing the serpentine belt can be found in the video provided in Source.
It’s important to ensure that you have the necessary tools and replacement parts before starting the replacement process. Additionally, following a detailed guide or video tutorial can be helpful for visualizing the steps involved in the replacement.
If you have any specific questions about the replacement process or need further assistance, feel free to ask!

How much labor does it take to replace a serpentine belt?

The average cost for serpentine belt replacement is between $109 and $134. Labor costs are estimated between $57 and $72, while parts range between $52 and $62. Whether you go to the mechanic or do it yourself, replacing a serpentine belt costs $58 to $126.

How long does it take for a mechanic to fix a serpentine belt?

Plus, replacement is relatively easy, and if you’re wondering how long does serpentine belt service take, it’s less than an hour for most vehicles.

What should be replaced when replacing serpentine belt?

This is important since loose belts can cause systems like the power steering, cooling system, and engine to fail. Whenever you get your serpentine belt replaced at your local Clinton service center, it’s a good idea to have the belt tensioner replaced as well.

Is it easy to replace a serpentine belt yourself?

Replacing the serpentine belt is as simple as threading it into position, cranking the tensioner and slipping the belt over the tensioner pulley, or nearest pulley up top. Belt tensioners are mostly spring tension. Once installed, the spring retains pressure to the belt.

How often should you change serpentine belt in a Ram 1500?

Made of sturdy rubber, this part may last anywhere between 50,000 and 100,000 miles.

What are the symptoms of a bad belt tensioner?

The third symptom is a squealing noise. If the belt tensioner isn’t applying the correct pressure on the belt. It’s going to slip. And create a squealing noise.

How long does it take to replace a serpentine belt on a truck?

It typically takes about an hour to replace the serpentine belt, and if you know some car repair basics, you could change the belt yourself.

What are the symptoms of a bad serpentine belt?

Bad serpentine belt symptoms

• Squeaking, squealing or chirping sound from under the hood of the car.
• Check engine light or battery light is illuminated on your dashboard.
• A/C isn’t working.
• Power steering isn’t working.
• The engine’s temperature is high or overheating.
• Smell of burnt rubber.

Do I need to replace belt tensioner when replacing serpentine belt?

Not necessarily, if there is good tension when you remove the belt, the spring is good, spin the pulley and see if there is any looseness or noise in the bearing. If there is, replace the tensioner.

How much does it cost to replace a serpentine belt on a Dodge Ram?

between $109 and $152
The average cost for a Dodge Ram 1500 Serpentine Belt Replacement is between $109 and $152.