AHG Auto Service » Make » Honda » How to replace a taillight on a Honda Odyssey?

How to replace a taillight on a Honda Odyssey?

How to Replace a Taillight on a Honda Odyssey
To replace a taillight on a Honda Odyssey, you can follow these general steps:
1. Gather the necessary tools: You will need a flathead screwdriver, a Phillips screwdriver, and a towel.
2. Open the back hatch: Locate the back hatch of your Honda Odyssey and open it.
3. Remove the plastic cover tabs: On the side of the taillight, you will find two plastic cover tabs. Use a flathead screwdriver to carefully pry them off.
4. Remove the taillight assembly: Once the plastic cover tabs are removed, you can access the screws that hold the taillight assembly in place. Use a Phillips screwdriver to remove these screws and carefully pull out the taillight assembly.
5. Replace the taillight bulb: Inside the taillight assembly, you will find the taillight bulb. Depending on the model year of your Honda Odyssey, the bulb type may vary. Refer to your vehicle’s manual or consult with a mechanic to determine the correct bulb type. Replace the old bulb with a new one, making sure it is securely in place.
6. Reinstall the taillight assembly: Once the new bulb is in place, carefully slide the taillight assembly back into position. Make sure it is aligned properly and secure it by tightening the screws with a Phillips screwdriver.
7. Replace the plastic cover tabs: Finally, reattach the plastic cover tabs by pressing them firmly into place.
That’s it! You have successfully replaced the taillight on your Honda Odyssey. If you have any further questions or need assistance, feel free to reach out to a professional mechanic or refer to the vehicle’s manual for more detailed instructions.
Please note that the specific steps may vary slightly depending on the model year of your Honda Odyssey. It is always recommended to consult the vehicle’s manual or seek professional assistance if you are unsure about any step of the process.

Can you replace a tail light yourself?

Replacing your car’s tail light bulbs is a simple and straightforward procedure. The rear light bulbs are usually housed in a single unit that’s easy to access from inside the boot. Haynes has full step-by-step information on how to do this. Most tail light bulbs are filled with halogen gas, and are readily available.

Is it easy to replace a tail light assembly?

It’s important to know what to expect with any car maintenance or repair job. Fortunately, tail light bulb replacement isn’t difficult and shouldn’t take you more than 45 minutes to an hour to complete.

How do you replace a rear tail light assembly?

How To Replace a Tail Light

  1. Step 1: Open trunk or tailgate.
  2. Step 2: Pull tail lamp assembly out (if needed)
  3. Step 3: Pull bulb out.
  4. Step 4: Add bulb grease, put new bulb in.
  5. Step 5: Reattach assembly (if needed)
  6. Step 6: Repeat on other side.

How much does it cost to replace a tail light on a Honda?

Honda Tail Lights Replacement from $93 | CarParts.com.

Are tail lights hard to change?

It’s important to know what to expect with any car maintenance or repair job. Fortunately, tail light bulb replacement isn’t difficult and shouldn’t take you more than 45 minutes to an hour to complete.

Will O Reilly change my tail lights?

If your vehicle needs a headlight or other bulb replaced, visit any O’Reilly Auto Parts location or shop online to find the best headlight bulbs for your vehicle, as well as tail light bulbs, turn signal bulbs, brake light bulbs, and much more. We also offer FREE bulb installation*.

How much does it cost to replace one tail light?

TAIL LIGHT BULB REPLACEMENT PRICING
The average cost to replace your tail light bulb is $20 – $100. Pricing may vary based on the type of car you have, as well as the type of (and quality) auto shop that you go to.

Is it OK to replace tail light bulb?

If one of your taillights has gone bad, you want to get it replaced as soon as possible, both for safety reasons AND because you don’t want to get pulled over. Sometimes the most complicated part about the replacement is the identification of the exact bulb that has burned out. You typically have three on both sides.

How much does it cost to replace a tail light assembly?

between $200 and $500
Tail light assembly replacements typically cost between $200 and $500, and possibly more if your vehicle is on the luxurious end. While it is possible to replace a tail light assembly yourself, it’s better to have a professional replace it for you.

Can AutoZone change your tail light?

While AutoZone doesn’t offer actual brake light replacement services, our team can assist you with any questions about the process, help you find the right products to get started, and maybe even give you a hand. How do you remove a brake light to replace it?

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment