AHG Auto Service » Make » Honda » How to remove the oil filter on a Honda Pilot?

How to remove the oil filter on a Honda Pilot?

Removing the Oil Filter on a Honda Pilot
To remove the oil filter on a Honda Pilot, you can follow these steps:
1. Gather the necessary tools: You will need an oil filter wrench, a catch pan, shop rags, and latex gloves.
2. Secure the vehicle: Before crawling under the vehicle, make sure it is securely lifted using jack stands or ramps. Safety glasses are also recommended.
3. Locate the oil filter: The oil filter is located next to the oil pan. On the Honda Pilot, it is on the other side of the right front tire. Turning the wheels as far as they go to the right will provide easier access to the filter.
4. Prepare the catch pan: Position the catch pan strategically beneath the oil filter to catch any oil that may spill during the removal process.
5. Loosen the oil filter: Use an oil filter wrench to loosen the oil filter. The Honda oil filter wrench is recommended for a tight fit and to prevent the socket from slipping.
6. Remove the oil filter: Once the oil filter is loosened, unscrew it counterclockwise until it comes loose. Be careful not to spill any oil from the filter.
7. Dispose of the old filter: Place the old filter in the catch pan and dispose of it properly according to local regulations.
It’s important to note that oil filters should be changed when the oil is changed to ensure optimal engine performance. For the Honda Pilot, oil changes are recommended after 3,000 miles with regular oil and after 7,500 miles with full-synthetic oil.
Remember to consult your vehicle’s owner’s manual for specific instructions and recommendations regarding oil filter removal and replacement.

How long does it take to change an oil filter?

However, as a general guideline, an oil change along with a filter replacement and fluid check typically takes around 30 minutes to an hour. Type of Vehicle: Larger vehicles, trucks, or those with more complex engine designs may take longer due to additional components that need attention.

How do you remove an internal oil filter?

Apply a small amount of clean oil on the new o-rings or gasket. This will help to create a good seal against the engine.

How do you change oil and engine oil filter?

Steps to changing your oil filter and engine oil

  1. Step 1: Locate and loosen the sump plug.
  2. Step 2: Lift pan as you remove sump plug.
  3. Step 3: Drain the oil.
  4. Step 4: Replace and tighten sump plug.
  5. Step 5: Remove the old oil filter.
  6. Step 6: Prepare new oil filter.

How do you change the oil filter on a Honda?

It. Finish removing it by hand. And pour the oil from the filter into the drain pan wipe. Down the area where the filter was threaded and make sure the old oring. Came off with the filter lubricate.

Why wont my oil filter come off?

Improper lubrication and torque are the main reasons why an oil filter could get stuck. Once this happens, you can use an oil filter wrench, sandpaper, and screwdriver to remove it. To prevent dealing with the same problem, make sure to lubricate the new oil filter’s seal and apply the proper torque.

Is an oil filter reverse threaded?

Which way do you unscrew an oil filter? – Quora. Turn it to the left, or counter-clockwise. For most situations in life, you can generally abide by the saying “rightie-tightie, lefty-loosey,” i.e. turn right (clockwise) to tighten, or left to loosen.

Can you remove just the oil filter?

Yes, you can absolutely change your oil filter without emptying the oil. If any oil comes out, it is only what is trapped beyond your anti-drain back gasket inside the filter. When changing the filter, you may end up losing anywhere from half a quart to a whole quart depending on your car.

How often do you change the oil filter on a Honda Pilot?

Here’s what you need to know about the Honda Pilot hybrid maintenance schedule: Engine oil: Change every year, unless the “maintenance due now” indicator is on. Oil filter: Replace every year, unless the “maintenance due now” indicator is on. Air filter: Change every 15,000 miles.

Do I need a new filter every time I change my oil?

Many manufacturers recommend that the oil filter be replaced every second time you get your oil changed. So, if you’re on a 3,000-mile cycle you’d change your filter every 6,000; if you’re on a 6,000-mile cycle (as with most modern vehicles) you’d change out every 12,000.

How long can a Honda Pilot go without an oil change?

The recommended Honda Pilot oil change interval is every 7,500 miles or every year, whichever comes first. Whether you perform this basic service yourself or take your Pilot to a professional service center, it’s always important to make sure your car gets the right kind of oil for optimum performance.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment