How to remove Subaru camshaft pulley?

Removing Subaru Camshaft Pulley
To remove the camshaft pulley from a Subaru, there are a few methods and tools that can be used. Here are some options:
1. Using a Strap Wrench: One method is to use a strap wrench to hold the camshaft pulley in place while turning the bolt. This can help prevent the pulley from rotating while you loosen the bolt.
2. Using a Camshaft Pulley Holder: Another option is to use a camshaft pulley holder tool. This tool is designed to hold the pulley in place while you loosen the bolt. It is specifically designed for Subaru camshaft pulleys.
3. Using a Breaker Bar: Some Subaru owners have had success using a long breaker bar to loosen the bolt on the camshaft pulley. It is important to be careful and ensure that the breaker bar is wedged securely to prevent any accidents.
It is worth noting that Subaru cam bolts can sometimes become difficult to remove due to corrosion or other factors. In such cases, it may be necessary to use additional techniques, such as drilling the bolt or using an extractor tool.
Remember to exercise caution and follow proper safety procedures when working on your vehicle. If you are unsure or uncomfortable with the process, it is recommended to consult a professional mechanic for assistance.
I hope this helps! Let me know if you have any other questions.

Can you replace a camshaft without pulling the engine?

Do you have to remove an engine to replace a camshaft? Sometimes you do, sometimes you don’t. It depends on whether you have room enough to do the job with the engine still in the vehicle. With overhead cams, you can generally do this job easily without pulling the engine.

How do you remove cam gear from camshaft?

For quite a while. And then then eventually it would kind of slow down I put a little more heat. And then finally the gear came off of the truck. So once the gear came off I was able to take apart.

Are pulley bolts reverse thread?

They are not reverse threaded. it looks like you have to take it off, from the look of the drawing it looks to be standard threaded id imagine that ring (#4) hold the whole assembly on the crank, with the long bolt going though it, best of luck!

Are camshaft bolts left hand thread?

Using a left-hand thread on the camshaft sprocket is rare, and using an arrow on the end of the bolt to identify it is unconventional. This is another trap to remember when working on these engines. This arrow indicates the direction to TIGHTEN the bolt.

Are Subaru bolts metric or standard?

Yes, almost all Subaru cars use metric bolts.

What tools do you need to work on a Subaru?

Subaru Tools and Equipment

• Hand Tools. Mechanic Tool Sets. Ratchets & Breaker Bars. Wrenches & Wrench Sets. Sockets & Socket Sets.
• Power Tools. Cordless Power Tools. Drills & Drivers. Impact Wrenches.
• Air Tools. Impact Wrenches. Air Hammers. Cut-Off & Grinders.
• Shop Equipment. Floor Jacks. Jack Stands. Bottle Jacks.

What size are Subaru cam bolts?

Subaru cam bolts…. These words strike fear in many Subaru owners. When Subaru was putting their engines together they decided to use 10mm hex or allen bolts.

What is a cam lock nut?

About Cam Lock Nut
It is an important part of the connection between wood and wood in the assembly of furniture. In the connection process, it is usually composed of a nut, a connecting rod, and a cam lock nut. The nut is inlaid into one board, and the cam lock nut is placed into another board.

Can you replace a camshaft without removing engine?

You will need to remove all the accessories, water pump, timing chain cover, cam timing sprocket, harmonic balancer, radiator, metal support thingy in front of the radiator (gets in the way of pulling the cam out), distributor, intake manifold (and everything on top of it), lifters, pushrods, valve covers (to loosen …

Are camshaft pulley bolts reverse thread?

They are not reverse thread, but they are super tight. You will have better luck loosening the cams and taking the cams out.