Removing the Spare Tire on Dodge Ram 1500
To remove the spare tire on a Dodge Ram 1500, you can follow these steps:
1. Gather the Necessary Tools: You will need a wheel wrench and a jack extension tube to remove the tire from its mount. Both tools are typically stored under the front passenger seat.
2. Lower the Spare Tire:
– Attach the wheel wrench to the jack extension tube.
– Insert the tube through the access hole between the lower tailgate and the top of the bumper, and into the winch mechanism tube.
– Rotate the wheel wrench handle counterclockwise until the spare tire is on the ground with enough cable slack to allow you to pull it out from under the vehicle.
3. Remove the Spare Tire: Once the spare tire is lowered, you can pull it out from under the vehicle.
4. Storage: If you’re removing the spare tire for storage or other purposes, ensure it is stored in a safe and secure location.
It’s important to note that the exact process may vary slightly depending on the specific model and year of your Ram 1500, so consulting your vehicle’s owner’s manual for detailed instructions and safety precautions is always a good idea.
If you have any specific questions or need further assistance, feel free to ask!
Contents
- How do you get a spare tire off a pick up?
- What is tire jack mode on a Ram 1500?
- How do you get the spare tire off a 2018 Dodge Ram?
- Where is the jack on a Dodge Ram?
- How do you lower the spare tire on a 2015 Dodge Ram?
- How do you get the spare tire off a 2017 Ram 1500?
- Where do you put the jack when changing a tire on a Ram 1500?
- How far can you drive on a Dodge Ram spare tire?
- How do you get the spare tire off a Dodge Ram?
- How fast can you go on a Ram 1500 spare tire?
How do you get a spare tire off a pick up?
And then the spare tire will start to come. Down. Now if it gets hung. Up. I just want to make sure it’s re-centered. And as long as it’s here just lower it and let it go to the ground all the way.
What is tire jack mode on a Ram 1500?
Areas. If your vehicle is equipped with air suspension. You’ll need to enable tire jack mode in the Uconnect system with the engine running. This will disable automatic leveling when changing a tire.
How do you get the spare tire off a 2018 Dodge Ram?
Insert the tube through the access hole between the lower tailgate and the top of the bumper, and into the winch mechanism tube. Rotate the wheel wrench handle counterclockwise until the spare tire is on the ground with enough cable slack to allow you to pull it out from under the vehicle.
Where is the jack on a Dodge Ram?
The jack is located under the passenger seat turn the wing bolt counterclockwise.
How do you lower the spare tire on a 2015 Dodge Ram?
Tire. Now while the truck is still on the ground loosen.
How do you get the spare tire off a 2017 Ram 1500?
Insert the tube through the access hole between the lower tailgate and the top of the bumper, and into the winch mechanism tube. Rotate the wheel wrench handle counterclockwise until the spare tire is on the ground with enough cable slack to allow you to pull it out from under the vehicle.
Where do you put the jack when changing a tire on a Ram 1500?
Now look for the proper jacking locations for a front wheel place the scissor jack under the rear portion of the lower control arm with the handle extended diagonally toward the rear of the vehicle.
How far can you drive on a Dodge Ram spare tire?
Spares cannot be driven over 50 miles per hour. Spare tires shouldn’t be driven for more than 70 miles. You’ll have less traction than with a full-size spare.
How do you get the spare tire off a Dodge Ram?
Up. Assemble this Rod. Put. It inside of this access port twist it around until you feel its seat in place grab your tire iron. You know what the old timers say righty tighty lefty Loosey.
How fast can you go on a Ram 1500 spare tire?
Do not drive over 50 miles per hour. Do not drive more than 70 miles on a spare. You will experience less traction with a spare tire.