How to remove rear axle shaft on Ford F150?

Removing the Rear Axle Shaft on a Ford F150
To remove the rear axle shaft on a Ford F150, you can follow these general steps:
1. Prepare the vehicle: Ensure that the vehicle is on a level surface and the parking brake is engaged. Also, gather the necessary tools such as a socket set, pry bar, and axle bearing puller if needed.
2. Remove the wheel: Begin by removing the wheel from the side where you want to remove the axle shaft. This will provide access to the axle assembly.
3. Remove the differential cover: Locate the differential cover on the rear axle and remove it. This will expose the differential gears and allow you to access the axle shaft.
4. Remove the pin and bolt: Inside the differential, you will find a pin that holds the axle shaft in place. Remove the bolt that secures the pin and then remove the pin itself.
5. Remove the axle shaft: With the pin removed, you can now push in on the axle shaft and remove the C-clip that holds it in place. Once the C-clip is removed, you can pull the axle shaft out of the axle housing.
Please note that these steps are a general guide and may vary depending on the specific model and year of your Ford F150. It is always recommended to consult the vehicle’s manual or seek professional assistance if you are unsure about any step of the process.
I hope this helps! Let me know if you have any other questions.

Does my F150 have 8.8 or 9.75 rear end?

Also you can tell by the diff cover shape. There’s pictures online. Basically if it’s symmetrical then it’s the 8.8. If it’s tapered on one side it’s the 9.75.

What is the problem with the rear axle on the Ford F150?

Ford Motor Company has recalled nearly 113,000 F-150 pickup trucks over concerns a rear axle hub could break off, causing the vehicle to lose power or roll away when in park.

How do you remove axle shaft seals?

Or a pry and out comes the seal. Be sure you’re subscribed to the how to Automotive YouTube channel or follow me on the Instagram. For more valuable tips like this thank you again for watching.

How much does it cost to replace the rear axle on a Ford F150?

The average cost for a Ford F-150 Axle Shaft Replacement is between $487 and $540. Labor costs are estimated between $153 and $193 while parts are priced between $334 and $347. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.

How long does it take to replace a rear axle assembly?

Regardless of whether it is the front or the back axle, installing it and fixing it could take an hour. Working in an axle replacement shop typically takes 1.5 hours on each side.

What axle does my F 150 have?

Mustangs, F150’s and other Fords can have their axle ratio easily identified by reading the sticker on the inside of the driver’s side door jamb.

What is the recall on the F150 rear axle bolt?

What is the issue tied to this recall? Certain 2021–2023 F-150 trucks with the Trailer Tow Max Duty package may experience a broken rear-axle hub bolt. Over time, this can result in unintended movement while the vehicle is in Park if the Electric Parking Brake (EPB) is not applied.

Is Ford recalling over 100000 F-150 trucks due to a rear axle issue?

More than 100,000 Ford F150 trucks produced between Jan. 28, 2020 and Dec. 25, 2022, have been recalled due to a possible defect in the rear axle hub in vehicles, according to the National Highway Transportation Safety Administration.

Is axle replacement easy?

This is a job most home mechanics could do in an afternoon, so read on for the basics of how to replace a CV axle. Block the wheels to prepare for jacking up the vehicle.

How can I tell what rear axle I have in my F150?

To find the axle code:

1. View the Safety Compliance Certification Label on the driver’s side, front or rear door panel.
2. Find the word “AXLE” under the bar code.
3. Find the two-digit code under “AXLE.”