How to remove front bumper Ford Transit Connect?

To remove the front bumper of a Ford Transit Connect, you can follow these steps:
1. Remove the intercooler cover/duct.
2. Remove all screws for the top grille reinforcement.
3. Remove the number plate.
4. Unclip both front wheel arch trims from the front bumper.
5. Behind the wheel arch trim, you’ll find 2 bolts on each side securing the bumper in place. Remove them.
6. The front bumper should now pull freely from the van.
7. Remember to unclip the ambient air temperature sensor from the bumper bottom grille .
Please note that these instructions are based on search result snippets and may vary depending on the specific model and year of the Ford Transit Connect. It’s always a good idea to consult the vehicle’s manual or seek professional assistance if you’re unsure about any step of the process.

Why is it important to remove retaining clips?

These clips are usually discarded the first time a brake job is done on a vehicle. If left on the hubs, the stud clips can cause major vibration issues and damage to the wheel and the vehicle when aftermarket wheels are installed.

How do you remove bumper retainer clips?

The clip into the hole. And press the post. So that it’s now flush with the head of the clip. There are aftermarket body Clips available which are much less expensive than the OEM body clips.

How do you remove a Transit Connect bumper?

We’ll remove that screw. And then we’ll do the same thing on the other side of the license plate. Bracket. Now that we have that one out let’s do the same on the driver’s.

What is a retainer for a bumper?

Bumper spacers, also known as bumper retainers, are located just behind the front and rear bumper in every automobile. The intention behind them is to provide equal spacing with a flush finish between the body panels on the exterior part of the vehicle.

How do you remove plastic clips from a bumper?

The clip into the hole. And press the post. So that it’s now flush with the head of the clip. There are aftermarket body Clips available which are much less expensive than the OEM body clips.

Is Ford ending the Transit Connect?

The Transit Connect’s departure is the latest in a line of small cargo vans leaving the U.S. market due to slow sales.

Why is Ford discontinuing the Transit Connect?

Ford ended Transit Connect sales in the U.S. “to reduce global manufacturing cost and complexity, alongside decreased demand for the compact van segment.” Ram, General Motors, Nissan and Mercedes-Benz have also abandoned the segment.

How do you remove retaining clips?

And split it apart just enough to cut over the groove. So I can slide it. Out. Some clips are much harder to remove. Many are narrow with no holes or internal Clips with poor. Access.

Are the rear seats removable in Ford Transit Connect?

And pull up to unlock it. Now move the entire seat forward and down to fold the third row seat find the strap on the seat cushion located in the seat bite. Here. Pull it and flip the cushion.

Is retainer fixed or removable?

There are two types of retainers: removable and permanent. A removable retainer will need to be worn every night, and a permanent retainer will be on your teeth at all times. Without a retainer, your teeth will eventually move back out of place — even after all of the hard work to straighten them.