AHG Auto Service » Make » Ford » How to remove custom wheel on Ford Transit?

How to remove custom wheel on Ford Transit?

Removing the Custom Wheel on a Ford Transit
To remove the custom wheel on a Ford Transit, you will need the right tools and follow a specific procedure. Here are the steps to remove the custom wheel:
1. Disconnect the battery: Before starting the removal process, it is important to disconnect the battery to prevent the airbag system from tripping.
2. Remove the airbag: Use a pry tool to remove the airbag from the center of the steering wheel. The airbag is held in place by clips, so gently pry it out. Once the airbag is loose, disconnect the wiring connected to the back of it.
3. Remove the main bolt and auxiliary screws: Use a ratchet and sockets, as well as screwdrivers, to remove the main bolt and auxiliary screws that attach the wheel to the vehicle. Carefully remove the wheel from the van.
It is important to note that these steps are a general guideline, and it is always recommended to consult the vehicle’s manual or seek professional assistance for specific instructions related to your Ford Transit model.
I hope this helps! Let me know if you have any other questions.

What if I lost my locking wheel nut key?

If you know who made your wheel locks, your best bet is to contact the manufacturer and order a replacement key. Some wheel lock sets come with a code that identifies them for the manufacturer so they can verify that you’re the owner. This allows them to provide you with the exact key for your locks.

Why do transit vans have small wheels?

Why do large vans (Ford Transit, MB Sprinter, Opel Movano) have small tires? Fuel mileage. A small light wheel and tire combination helps greatly with better fuel mileage.

What size are the lug nuts on a transit custom?

Specifications

Thread M14 x 1.5
Hex 21mm
Seat Flat
Thread Length 25mm
Overall Nut Width 31mm

Where is the wheel jack on a Ford Transit Custom?

All you need to do is slide the seat forward and access the rear of the seat. Then, lift the cover panel and pull the jack out. The jack handle and lug wrench are located on the side of the passenger seat base.

How to change custom Tyres on a Ford Transit?

Where you open up both doors. And you remove this little rubber grommet. And you will see this stupid-looking shaped thing here that no other shape in the world looks like you’ll stick it in like so.

What size are the wheel nuts on a Ford Transit Custom?

21mm Hex
Additional information

Hex Size 21mm Hex
Thread Size M14 x 1.5
Seat Tapered Seat
Type Wheel nuts
Finish Zinc Plated

Where is the locking wheel nut key on a Ford Transit Custom?

glove box
The locking lug nut key is located in the glove box or next to the vehicle jack. The spare wheel is under the rear of your vehicle. If the spare wheel is the same type and size as your vehicle road wheel, you can fit the spare wheel and continue to drive in the normal manner.

What happens if I cant find my wheel lock key?

If you have the code to your key, a dealer or manufacturer can replace the key. Additionally, if you know the brand, make, or model of your wheel lock, you can often order a replacement key online. Otherwise, you will have to pay to have your wheel lock removed by a professional.

How do you take the wheels off a Ford Transit?

Slide the spare wheel out from under the vehicle. And disengage the cable bracket by unscrewing the wing.

How do you remove a stuck wheel from a hub?

A big and heavy Hammer you’ll need a piece of 2×4 wood. Place it on the inner side of the rim. And then hit it firmly with a hammer. With enough effort. You should be able to free up that stock wheel.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment