Removing the Bumper from a Chevy Equinox
If you’re looking to remove the bumper from your Chevy Equinox, the process can vary slightly depending on the model year. Here’s a general overview of the steps involved:
Front Bumper Removal:
To remove the front bumper of your Chevrolet Equinox, you will need a set of ratchet wrenches, some screwdrivers, and torx bits. The specific steps for removing the front bumper cover on a 2010-2017 Chevy Equinox are as follows:
1. Remove the four push pin retainers from the driver side engine compartment trim.
2. Remove the four push pin retainers securing the driver side wheel well shield; two inner, and two along the fender.
3. Remove the two T20 screws securing the driver side wheel well shield.
4. Pull the wheel well shield away from the fender and bumper edge.
5. Remove the inner 7 mm screw securing the driver side bumper cover to the fender.
Rear Bumper Removal:
The process for removing the rear bumper of a Chevy Equinox is not very challenging and can be accomplished with a few tools. The specific steps for removing the rear bumper cover may vary based on the model year, so it’s important to refer to the specific instructions for your vehicle.
It’s worth noting that the process for removing the bumper cover may differ for newer model years, such as the 2018-2024 Chevy Equinox. For example, there are videos available demonstrating how to remove the front bumper cover in under 5 minutes for the 2018-2023 Chevy Equinox.
For more detailed instructions and visual guidance, you may also find helpful resources on platforms like YouTube, where individuals demonstrate the process of removing and replacing the front and rear bumper covers for various model years of the Chevy Equinox ,,,.
Always ensure that you have the necessary tools and equipment before attempting to remove the bumper, and refer to the specific instructions for your vehicle’s model year to ensure a successful removal process.
Contents
- How long does it take to remove a car bumper?
- How do you take off a car bumper?
- Is it cheaper to repair or replace a bumper?
- How much does it cost to fix a bumper that’s falling off?
- Can you change the bumper of a car?
- What tools do I need to replace a bumper?
- How do you fix a car bumper that fell off?
- How do you pop a plastic bumper?
- How much does it cost to pop a bumper back in?
- Can I replace a bumper by myself?
How long does it take to remove a car bumper?
It depends on the manufacturer and could take anything from 15 minutes to 2 hours. different companies use different methods to attach them with the German companies like vw favouring maybe 6 bolts and a lot of push clips so it can be removed very quickly and easily.
How do you take off a car bumper?
Shield turn the steering wheel all to the right and do the same. Procedure. Don’t forget to remove the eight millimeter bolt underneath the bumper. Before you can completely remove the bumper.
Is it cheaper to repair or replace a bumper?
Sometimes it’s more affordable to replace your bumper entirely than to repair it. If you have major damage, including shock compression or sensor damage, it’s best to look at replacing the entire bumper. The cost of bumper replacement varies widely.
How much does it cost to fix a bumper that’s falling off?
How Much Does Car Bumper Replacement Cost?
| Car Type | Average Replacement Cost |
|---|---|
| Economy Car | $500 – $700 |
| Mid-Range Car | $700 – $1,000 |
| Luxury Car | $1,000 – $1,500 |
Dec 6, 2023
Can you change the bumper of a car?
Minor issues can usually be repaired, but more serious damage could require a new replacement bumper. The choice between bumper repair or replacement will come down to the extent of the damage. Typically minor scratches, dents and chips can be easily repaired using specialized tools found in an auto body shop.
What tools do I need to replace a bumper?
Tools Required:
Most vehicles today use fasteners like plastic or nylon push pins along with bolts. Remove all the push pins that hold the bumper in place using a clip removal tool or a flathead screwdriver to pry it open. Loosen the retaining bolts at the top and bottom of the bumper using a socket and ratchet set.
How do you fix a car bumper that fell off?
As soon as the glue is placed take your duct tape. And bring the seam together to its original factory position not too tight. And not too loose. Remember you want this to look as natural as possible.
How do you pop a plastic bumper?
I choose to just continually make little test pushes with a glove to see how the area feels. Once the plastic starts to move more easily. It’s time to live by the rule of first in last out.
How much does it cost to pop a bumper back in?
Don’t worry, it happens to the best of us. As for the cost of getting your front bumper popped into place, it really depends on the extent of the damage. If it’s just the clips that need to be replaced, you might be looking at a relatively cheap fix, maybe around $50-$100.
Can I replace a bumper by myself?
Installing a pre-painted replacement bumper can be a cost-effective and time-saving alternative to having an auto-body shop do the job. We previously discussed this approach in our post, “Paint A Part: Super Fast DIY Body Repair.” You can order a pre-painted bumper on Paint A Part’s eBay Store.
