To install a Pedal Commander in a Ford Explorer, you can follow these steps:
1. Prepare your vehicle: Wait for about 10-15 minutes with your driver’s door open to allow the ECU (engine control unit) to shut down.
2. Locate the accelerator pedal assembly plug connection: Find the plug that connects to your gas pedal.
3. Remove the plug: Disconnect the plug from your gas pedal.
4. Connect the Pedal Commander: Plug the male and female connectors of the Pedal Commander into their coordinating plugs on the gas pedal. Ensure that both plugs click into place.
5. Clean the mounting area: Use the included alcohol wipe to clean the area where you want to mount the bracket. Apply light pressure and use a gentle, circular motion to clean the surface of dust.
6. Attach the bracket: Apply the supplied Velcro to the bracket and the cleaned area.
7. Mount the Pedal Commander: Place the Pedal Commander into the bracket, and you’re done!
According to the search results, the installation process is quick and easy, taking about 10 minutes. The Pedal Commander is a plug-and-play device, meaning it does not require any modifications to your vehicle and will not void your warranty . It is also Bluetooth compatible, allowing you to control the unit using the free Pedal Commander app on your phone.
Please note that it’s always a good idea to consult the specific installation instructions provided by the manufacturer to ensure a successful installation.
Contents
- Will a Pedal Commander drain your battery?
- Where does the Pedal Commander plug into?
- How much HP does a Pedal Commander add?
- Is Pedal Commander bad for engine?
- Do pedal commanders cause issues?
- Does installing a Pedal Commander void warranty?
- Do you need a tune for a Pedal Commander?
- Does Pedal Commander really save gas?
- How long does it take to install Pedal Commander?
- How do you install a Pedal Commander?
Will a Pedal Commander drain your battery?
A: The Pedal Commander gets it’s power from the position sensor located on the pedal itself. The car shuts down the supply to such systems after a predetermined time, so there no power to drain.
Where does the Pedal Commander plug into?
So there’s our throttle connector right there so we’re gonna unplug that. And our pedal commander is gonna be installed in between there there we go. So unplugged it right there. So now it’s pretty
How much HP does a Pedal Commander add?
The answer to the “How Much Horsepower Does a Pedal Commander Add?” question is none.
Is Pedal Commander bad for engine?
Due to the fact that it doesn’t interfere with the fuel system, this connection style prevents your engine from overheating. Additionally, since you won’t be removing anything connected to the engine or its ECU, your warranty won’t be voided. If so, the answer to the question is “yes,” and you can use it in your car.
Do pedal commanders cause issues?
As we answer the “Is Pedal Commander bad for your car?” question, there is no such thing as Pedal Commander causing problems. The reason is that Pedal Commander eliminates any throttle lag from your accelerator without damaging the engine.
Does installing a Pedal Commander void warranty?
Will the “Pedal Commander” void my warranty? No. “Pedal Commander” will not void your warranty or leave flags on the ecu.
Do you need a tune for a Pedal Commander?
Well…the short answer is yes. The “tune” and the Pedal Commander will operate completely independently of each other. However, to get a custom tune you will either be using a handheld tuner and provide the tune yourself or a shop used their computer and software and tuned the vehicle.
Does Pedal Commander really save gas?
In fact, the Pedal Commander can even improve your gas mileage. By optimizing your vehicle’s throttle response, you’ll be able to accelerate more efficiently, which can result in better fuel economy.
How long does it take to install Pedal Commander?
15 minutes
Unlike risky and expensive upgrades like increasing horsepower and chip tunings, Pedal Commander installed offers a more affordable and practical installation process for you. It only takes 15 minutes.
How do you install a Pedal Commander?
Find the male and female attachments to the gas pedal cable; take the male end of the pedal commander and insert it into the female attachment of the gas pedal cable, and then take the female end of the Pedal Commander and reinsert it into the gas pedal. Whew – It’s done! It’s connected.