How to install crossbars on Subaru Outback?

Installing Crossbars on a Subaru Outback
To install crossbars on a Subaru Outback, you can follow these general steps:
1. Check the owner’s manual: Before proceeding with the installation, it’s always a good idea to consult the owner’s manual for specific instructions and guidelines regarding the installation of crossbars on your particular model of Subaru Outback.
2. Gather the necessary tools: Depending on the type of crossbars you have, you may need some basic tools such as a screwdriver or wrench to complete the installation. Make sure you have the required tools on hand before starting the installation process.
3. Locate the mounting points: The Subaru Outback typically has built-in roof rails or mounting points that are designed to accommodate crossbars. These mounting points are usually located on the roof of the vehicle.
4. Position the crossbars: Place the crossbars onto the mounting points, ensuring that they are aligned properly and evenly spaced. The specific method of attaching the crossbars may vary depending on the model and type of crossbars you have.
5. Secure the crossbars: Once the crossbars are in position, use the provided hardware or fasteners to secure them to the mounting points. Follow the manufacturer’s instructions for tightening the fasteners to the appropriate torque specifications.
6. Test the installation: After securing the crossbars, give them a gentle tug to ensure they are securely attached to the vehicle. It’s important to verify that the crossbars are properly installed and will not come loose during use.
Please note that the installation process may vary depending on the specific crossbars and vehicle model. Always refer to the manufacturer’s instructions and the owner’s manual for the most accurate and up-to-date information on installing crossbars on your Subaru Outback.

Does the Outback have crossbars?

I am looking into Outbacks and a roof rack is very important to me. The crossbars seem incredibly skinny, compared to my current Thule Aero rack, and they are not T-Slot.

What is the difference between roof rails and roof racks?

Basically, the key difference between these two is the direction that they’re mounted on the roof of your vehicle. Roof rails run along the length of your car’s roof, whilst roof racks are mounted from door to door across your roof.

How much weight can a Subaru Outback roof rack hold?

176 lbs.
According to Subaru themselves, the Subaru Outback has a dynamic weight capacity of 176 lbs. That means, that the Subaru Outback can carry 176 lbs of weight on the roof when you are driving. However, when the vehicle is parked, that weight capacity increases all the way up to 650 lbs.

How much weight can Subaru crossbars hold?

These fixed-style crossbars can be installed or removed in minutes. May be used in conjunction with Genuine Subaru roof attachments and carriers. Total roof load weight limit of 150 lbs.

Do you need roof rails for crossbars?

If you can figure out a way to mount the crossbars directly to the roof, then no, you really don’t need the rails. The good thing about rails is that it’s generally easier to adjust the distance between the rails (i.e. to fit a cargo box that has fixed mounting points).

How do you attach crossbars to a Subaru Outback?

Crossbar then move the crossbar rear work realign it with the holes located on the passenger. Side and use the torque wrench to tighten back down. Now you’re ready to start your next adventure.

Where do you put the crossbars on a Subaru?

minimize wind noise when the sunroof is tilted open, we recommend that the front crossbar be installed as far rearward on the side rails as possible when not using the crossbars to transport objects.

What happens if you exceed roof rack weight limit?

In addition, dangers can arise due to the air stream and the increased centre of gravity of the vehicle. In the worst case, the increased centre of gravity can lead to overturning in the bend in the event of overloading.

Where should roof bars be placed on roof rails?

It’s usually recommended that you position the bars around 70cm apart, fitting them far enough forwards so you can fully open your hatchback with gear on the roof. Again, the roof bar or fitting kit instructions will confirm this.

How far apart should Subaru crossbars be?

Specific vehicle fitment requirements will be outlined in the Fit Kit installation guide for your vehicle, if needed. If no special fitting positions are given in the assembly instructions, the bars should be placed between 24 and 36 inches apart, measured from the same position of each crossbar.