How to install a license plate on a Subaru?

Installing a License Plate on a Subaru
To install a license plate on a Subaru, you have a few options based on the information available from various sources.
1. Using a Front License Plate Bracket:
– You can buy discounted parts and accessories online at SubaruOnlineParts.com, which offers genuine Subaru parts and OEM accessories for your vehicle.
2. Mounting the License Plate:
– Some users have mentioned using a front license plate bumper mounting bracket available on eBay, which mounts with 2 screws in dimples and uses rubber spacers for a solid and easy solution.
3. DIY Solutions:
– Some users have found solutions on Amazon, such as a universal plate kit that includes special small screws and a tool for mounting the license plate without drilling holes.
4. Dealer Assistance:
– Dealers may offer to drill attachment holes or install a mounting adaptor for the license plate, often free of charge.
5. Using Pre-Drilled Holes:
– Some Subaru models have pre-drilled holes for the license plate, making it easy to hand screw in the screws from a matching plate holder kit.
It’s important to consider the specific model of your Subaru and the regulations in your state regarding front license plates when choosing the installation method. If you’re unsure about the best approach for your Subaru model, it may be helpful to consult with a Subaru dealership or a professional auto service provider for guidance.

How do you drill a front license plate?

How do you drill a hole in a front license plate?

1. Mark that spot. Measure 5.3 inches left and 2.375 inches up from your license plate center.
2. Do the same. Do the same – only go left and down, right and up, right and down, traveling 5.3” vertically and 2.375” horizontally of center.
3. Use a drill.
4. Complete.

How do you screw in a license plate?

There. And when you’re putting on your registration. Tab just make sure that the plate is nice and dry.

How do you put a license plate on a Subaru?

And they’re about the size of a pinpoint. So there’s one here. And one right there that is where you’re going to screw. Your screws in to mount your license plate. So it’s very easy to do i suggest.

How do you install a front license plate mount?

But you don’t want to over tighten. Because you are attaching metal screws into plastic stick. And you don’t want to strip that attachment point now your mounting bracket is attached to the vehicle.

What size hole for license plate mounting?

The resulting 1/4 margin is needed to ensure acceptable finished license plates, given the requirements of the sheeting and the production process. Bolt holes are . 3125 inches in diameter and each are spaced (to bolt hole center) +/- 3.5 inches horizontal and +/- 2.375 inches vertical from the center of the plate.

Do all cars use the same license plate screws?

We’re sorry to break it to you: there’s not a standard license plate screw size. One-fourth of an inch in diameter by three-fourths of an inch in length is the most common screw size; ¼” X ⅞” is also fairly common; then there are a ton of other specialized types and sizes.

Can you drill holes in license plate?

As long as you don’t alter or obscure any of the text on the plate, you should be ok.

How do you put a license plate on a car without screws?

You could try an adhesive-mounted bracket or a bracket designed for the shape of your specific model’s bumper. There are also brackets that fit into the tow hook anchor located on the front bumper of many newer models.

Are there special screws for license plates?

There are no special screws made for license plate. The screw to be use will depend on the mating interface spec ie the nut. But it is recommended to use and anti vibrating fastener such as flange bolts and flange nut or nyloc insert bolt.

What size screws for license plate Subaru Forester?

CORRECT LENGTH: These 16mm (5/8 in) Screws are Perfect for both Frame and Frameless Installations. PHILLIPS PAN HEAD: Installs with a Regular Phillips Screwdriver. No Special Tools Needed.