How to do cruise control on Subaru Impreza?

How to Use Cruise Control on Subaru Impreza
To use cruise control on a Subaru Impreza, you can follow these steps:
1. Ensure that the conditions are suitable for using cruise control: According to the Subaru Impreza owner’s manual, there are certain conditions in which you should not use cruise control. These include driving up or down a steep grade, driving on slippery or winding roads, and driving in heavy traffic.
2. Activate the cruise control function: To activate the cruise control function, follow these steps:
– Turn the ignition switch ON.
– Press the CRUISE main switch button.
– The cruise control indicator light should illuminate, indicating that the cruise control function is active.
3. Set the desired speed: Once the cruise control function is activated, you can set the desired speed by following these steps:
– Accelerate to the desired speed.
– Press the SET/COAST button on the steering wheel.
– The vehicle will maintain the set speed until you cancel the cruise control or apply the brakes.
4. Adjust the speed: If you need to adjust the set speed while cruise control is active, you can do so by pressing the RES/ACC button on the steering wheel. Each press of the button will increase the set speed by approximately 1 mph (1.6 km/h).
5. Cancel the cruise control: To cancel the cruise control function, you can do any of the following:
– Press the CANCEL button on the steering wheel.
– Depress the brake pedal.
– Depress the clutch pedal (if equipped with a manual transmission).
– Turn the ignition switch OFF.
Please note that the availability and operation of cruise control may vary depending on the specific model and trim level of the Subaru Impreza. It is always recommended to consult the owner’s manual for detailed instructions and specific information related to your vehicle.
I hope this helps! Let me know if you have any other questions.

Does Subaru Impreza have cruise control?

2024 Subaru Impreza Safety features
Another helpful feature in the suite assists with throttle control, braking, and steering. This feature is the advanced adaptive cruise control with lane centering.

Where is my cruise control button?

steering wheel
Typically, the cruise control buttons can be found on the right-hand side of the steering wheel. Depending on the car, the location of the controls can vary, but the functionality of the cruise control will usually be similar across the board.

Is Subaru discontinuing the Impreza?

For nearly the last 30 years the Subaru Impreza has carried the torch for being the most affordable model in Subaru’s North American lineup. And for 2024. There’s an all-new sixth generation however

Why is my cruise control not working on my Subaru?

The first step is to check the cruise control fuse. Consult your owner’s manual to find the fuse box diagram, and locate the fuse connected to the cruise control system. If it’s blown, you could try replacing the fuse and testing the cruise control. That could be enough to have you cruising in comfort once again!

How do you turn on a Subaru Impreza?

And you press the button and that turns on the car. So for this we’re not going to put our foot on the brake we’re just gonna click the button. Itself.

What is the cruise control symbol?

The cruise control system will often be a speedometer symbol with an arrow pointing to a set speed. It will light up green when it has been successfully set, and an amber or yellow light can indicate that cruise control is enabled but not set, or that there is a problem with the system.

How do you turn the cruise control?

To use cruise control, you can typically press buttons on your steering wheel to activate the system, set your speed, adjust your speed up or down within the system, and deactivate the system. Using cruise control lets you set a speed for your car to maintain even if you take your foot off the gas.

How do you turn on cruise control on a Subaru Impreza?

But I want to bump this up a little bit so I’m going to push. And hold it up to increase the speed. We’ll increase it to 75. Right now. But you’ll see it’s uh it’s not going 75.

How do you know when cruise control is on?

ON/OFF: To set the cruise control, press the ON/OFF button. You will see the cruise light illuminate on the dashboard which means the system is activated. To turn the system off, press this button again.

How does Subaru cruise control work?

Eyesight can detect when your cruise control speed is lower than the speed you set, such as when it is only going 40mph when it is set to 50mph. Therefore, if the vehicle in front of you increases speed, your vehicle will automatically adjust its speed to reach the cruising speed you have set.