How to do an oil change on a Subaru Impreza?

How to do an oil change on a Subaru Impreza
Changing the oil regularly is an important maintenance task that can help keep your Subaru Impreza in good condition. Here is a step-by-step guide on how to do an oil change on a Subaru Impreza:
1. Gather the necessary tools and materials:
– Socket wrench
– Oil filter wrench
– Drain pan
– Funnel
– New oil filter
– New engine oil (refer to your owner’s manual for the recommended oil type and quantity)
2. Prepare your vehicle:
– Park your Subaru Impreza on a level surface and engage the parking brake.
– Allow the engine to cool down for a few minutes.
3. Locate the oil drain plug:
– The oil drain plug is typically located on the bottom of the engine oil pan.
– Consult your owner’s manual or refer to online resources for the exact location of the drain plug on your specific model.
4. Drain the old oil:
– Place the drain pan beneath the oil drain plug.
– Use a socket wrench to loosen and remove the drain plug.
– Allow the old oil to drain completely into the pan.
– Once the oil has finished draining, replace the drain plug and tighten it securely.
5. Replace the oil filter:
– Locate the oil filter, which is usually located near the oil pan.
– Use an oil filter wrench to remove the old oil filter.
– Apply a thin layer of new oil to the rubber gasket of the new oil filter.
– Screw the new oil filter onto the engine by hand until it is snug, then tighten it an additional 3/4 turn.
6. Add new oil:
– Locate the oil fill port, which is typically located on the top of the engine.
– Remove the oil fill cap.
– Insert a funnel into the oil fill port.
– Slowly pour the recommended amount of new engine oil into the engine.
– Check the oil level using the dipstick and add more oil if necessary.
7. Clean up:
– Wipe off any spilled oil and ensure that the drain plug and oil filter are securely tightened.
– Dispose of the old oil and oil filter properly at a recycling center or an auto parts store.
It’s important to note that if you are unsure about performing an oil change yourself or prefer to leave it to professionals, you can always contact a Subaru service center to schedule a service appointment .
Remember to consult your owner’s manual for specific instructions and recommendations for your Subaru Impreza model.

Can you change your own oil on a Subaru?

Unlike other car maintenance tasks, changing your engine oil is something you can do on your own. If you are new to this process, it can take around an hour but subsequently, you should be able to manage in half an hour.

How often does a Subaru Impreza need an oil change?

6,000 miles
Subaru recommends that the oil should be changed every 6 Months or 6,000 miles.

How do you change the oil on an Impreza?

After the oil is finished draining replace the Crush Washer with a new one and reinstall the oil drain plug be careful not to over tighten remove the old oil filter.

Do Subarus need special oil changes?

No. Subaru Synthetic Motor Oil works with the same Subaru filters used with conventional motor oils.

Is it easy to change your own oil?

It’s not difficult to change the engine oil in your own car, but it can be messy and you could hurt yourself if you’re not careful. Find where the engine oil filler cap is. Usually it is somewhere on the top of the motor and will be coloured yellow (user serviceable item). Find what oil your car uses.

What oil is best for Subaru Impreza?

If a Subaru-approved oil isn’t available, you can use the API classification SN with “RESOURCE CONSERVING” or the ILSAC GF-5 oil. As far as engine oil goes, the Impreza will match the Crosstrek. This means that 0W-20 synthetic oil is recommended, but 5W-30 conventional oil can be used if needed.

How long can a Subaru Impreza go without an oil change?

For the most part, your Subaru needs an oil change every 5,000 to 7,000 miles. However, if you tend to travel under more extreme circumstances, you may want to consider having an oil replacement more frequently.

How long can Subarus go without an oil change?

The best place to start is with your Subaru’s owner’s manual. Most newer models can typically go between 5,000 and 7,500 miles between changes. However, if you’re driving an older model, you might need to change it more frequently.

Does a Subaru Impreza need synthetic oil?

That depends on the age of your model. If you drive a Subaru Impreza model that’s from the 2012 model year or newer, OEM synthetic Subaru oil (0W-20 synthetic oil) is a must. If you drive a model from between 2002 and 2012, you should use 5W-30 conventional oil.

How many quarts of oil does a Subaru Impreza take?

Subaru Oil Guide:

Model	Subaru Oil Required	Capacity
Subaru Impreza 2002 – 2011	5W-30 Conventional Oil	4.4 Quarts
Subaru Impreza 2012 – 2021	0W-20 Synthetic Oil	4.7 – 5.3 Quarts
Subaru Legacy & Outback 2002 – 2012	5W-30 Conventional Oil	4.4 Quarts
Subaru Legacy & Outback 2013 – 2021	0W-20 Synthetic Oil	4.4 – 5.1 Quarts