How to do an oil change on a Chevy?

Steps to Perform an Oil Change on a Chevy
Performing an oil change on a Chevy involves several steps. Here’s a general guide to help you through the process:
1. Gather the necessary tools and materials:
– Wrench to remove the drain plug
– Oil filter wrench
– Oil drain pan
– Funnel
– Latex gloves
– Jack and jack stands or ramps (optional, depending on ground clearance)
– Oil
– Oil filter
2. Prepare the vehicle:
– Park the vehicle on a level surface and engage the parking brake.
– Allow the engine to cool down for a few minutes.
3. Locate the oil drain plug:
– Consult the owner’s manual or refer to online resources for the specific location of the drain plug on your Chevy model.
4. Drain the old oil:
– Place the oil drain pan beneath the drain plug.
– Use the wrench to loosen and remove the drain plug.
– Allow the old oil to drain completely into the pan.
– Once the oil has drained, reinstall the drain plug and tighten it securely.
5. Replace the oil filter:
– Locate the oil filter, which is typically located near the engine.
– Use the oil filter wrench to remove the old oil filter.
– Apply a thin layer of new oil to the rubber gasket of the new oil filter.
– Install the new oil filter by hand, ensuring it is tightened securely.
6. Add new oil:
– Locate the oil filler cap on the engine.
– Remove the cap and insert a funnel.
– Pour the recommended amount and type of new oil into the engine, as specified in the owner’s manual or by the manufacturer.
– Replace the oil filler cap.
7. Check the oil level:
– Start the engine and let it run for a few minutes.
– Turn off the engine and wait for a few minutes to allow the oil to settle.
– Remove the dipstick, wipe it clean, reinsert it, and then remove it again to check the oil level.
– Add more oil if necessary to bring it to the recommended level.
8. Dispose of the old oil:
– Transfer the old oil from the drain pan to a sealed container.
– Take the container to a recycling center or an authorized facility for proper disposal.
Please note that these steps are a general guide, and it’s important to consult the owner’s manual or specific resources for your Chevy model for detailed instructions and any model-specific considerations.

How do you change car oil for beginners?

How to Change Your Oil

1. Step 1: Jack It Up, Open It Up. First, you’ll want to lift the car high enough to give yourself room to work under it.
2. Step 2: Unplug It, Drain It.
3. Step 3: Off With the Old Filter.
4. Step 4: Drain Plug in, Filter On.
5. Step 5: Fill It Back Up with Oil.
6. Step 6: Check the Oil Level, Check for Leaks.

Is it cheaper to do my own oil change?

The cost of buying the parts and installing them yourself may be less than the cost of parts plus the labor costs at the auto mechanic’s shop, but if you include labor, recycling, time, and cleanliness costs for yourself, costs become almost identical.

What do they ask you to do at an oil change?

What Happens During an Oil Change Service?

• Check the current oil level and condition of the oil.
• Drain the old oil out of the engine from the bottom.
• Remove the old, dirty oil filter.
• Install a new oil filter.
• Put new, clean oil into the engine.
• Lubricate the vehicle’s chassis.
• Perform a multi-point vehicle inspection.

How to do an oil change step by step?

10-Step Oil Change Instructions:

1. Raise the vehicle.
2. Position catch pan and remove plug.
3. Inspect vehicle while all oil drains.
4. Reinstall drain plug and torque.
5. Remove old oil filter.
6. Clean mount and remove old O-ring.
7. Lube new filter and attach by hand.
8. Remove oil fill cap and add new oil.

Do you have to reset the change oil light?

Every time you get your car’s oil changed, it’s important to reset the oil change indicator light on your dashboard. If you don’t reset the indicator, you may find that your car will indicate that you need another oil change far sooner than it should.

Can you do an oil change yourself?

An oil change is a very simple job that will help keep you safe on the road. You can either ask your local workshop to carry out the oil change for you or do it yourself. If doing it yourself, you should always wear gloves and eye protection if you are working under your vehicle.

How do you clear the oil change on a Chevy?

Four. Times so that’s it we just showed you how to reset the oil life in your Chevy. Truck thanks for watching another episode of the DIY. Guide.net.

How often does a Chevy need an oil change?

between 7,000-10,000 miles
Chevrolet Recommended Oil Change Intervals
The broad guideline for Chevrolet vehicle oil changes is between 7,000-10,000 miles. That said, certain vehicles will need their oil changed sooner, and this is doubly true for vehicles being driven hard.

Is it worth doing an oil change by myself?

It is best to take your car to a professional mechanic who has the experience and knowledge necessary to perform an oil change safely and effectively. A professional will also be able to identify any problems with your vehicle before they become serious, saving you time and money in the long run.

How long can you drive after oil change light comes on?

In general, a flashing oil light will turn into a serious problem after around 2 weeks or 500 miles of driving. However, once it reaches that stage, things can quickly deteriorate, resulting in catastrophic mechanical damage. As a result, schedule an appointment with a mechanic as soon as possible.