How to disconnect transmission cooler lines from radiator Ford?

Disconnecting Transmission Cooler Lines from Radiator in a Ford
To disconnect the transmission cooler lines from the radiator in a Ford, you will need a special tool called a transmission oil cooler line disconnect tool. Here’s a step-by-step guide on how to do it:
1. Gather the necessary tools: Before starting the process, make sure you have the appropriate tools. You will need a transmission oil cooler line disconnect tool specifically designed for Ford vehicles.
2. Locate the transmission cooler lines: The transmission cooler lines are connected to the radiator. They are usually made of steel and have a flare nut on the end. The lines can be found underneath the car, either on the passenger side if it’s a rear-wheel-drive vehicle or near the engine block if it’s a front-wheel-drive vehicle.
3. Prepare the area: It’s a good idea to clean the area around the transmission cooler lines and the radiator to prevent any dirt or debris from entering the system.
4. Use the disconnect tool: Insert the transmission oil cooler line disconnect tool into the fitting on the radiator. Push the tool towards the radiator until you feel it pop past the spring. With the tool in place, pull straight back to disconnect the transmission line from the radiator. The tool is specifically designed to release the line from the fitting.
5. Repeat for the other line: If your vehicle has two transmission cooler lines connected to the radiator, repeat the process for the second line.
It’s important to note that using the correct tool is crucial for a successful disconnection. Regular fuel line or A/C line tools may not work for this purpose, so make sure you have the proper transmission oil cooler line disconnect tool designed for Ford vehicles.
Remember to exercise caution and follow safety guidelines when working on your vehicle. If you’re unsure about any step of the process, it’s always recommended to consult a professional mechanic or refer to the vehicle’s manual for specific instructions.
I hope this helps! Let me know if you have any other questions.

How does transmission fluid get into radiator cooler?

Here’s how your transmission stays cool: Whenever your engine is running, the transmission fluid gets pumped into the transmission cooler, which lives inside your car’s radiator. As the transmission fluid passes through the radiator (inside those transmission cooler lines), it essentially gets bathed in coolant.

How do you remove a Ford transmission cooler line without a tool?

So i am not going to have a light on this right now so anyway as you can see what i do is i take the plastic. And i go in between the fitting like this. And i take two of them. Like that sorry why is

Are transmission lines connected to radiator?

How Car Transmission Lines Work. Car transmission lines connect your vehicle’s transmission to the vehicle’s radiator. Also known as transmission cooling lines, they are typically made of metal or composite aluminium and rubber hoses because they can handle the flow of hot transmission fluid.

What are the two lines that connect to the radiator?

Your engine has two radiator hoses: an inlet hose, which takes the hot engine coolant from the engine and transports it to the radiator, and an outlet hose, which transports the engine coolant from the radiator to the engine.

How do you connect transmission cooler lines to radiator?

Get the tape off of there. Slide that lock. Down go ahead and slide this up and into the cooler. We’re going to listen for a. Click.

What happens if transmission cooler line breaks?

The transmission fluid going through the cooler lines is being pumped at high volume. Meaning, in just a matter of seconds, you could have several quarts of transmission fluid all over the underside of the vehicle and on the ground. Once you lose about 3 to 4 quarts (on average) the vehicle will stop moving.

How do you remove transmission cooler lines from a radiator?

And then you push it in until you hear the click. Listen. Just like that. And that’s it. It’s all done.

Does coolant run through transmission cooler lines?

It is rare for a transmission to have coolant pipes run through a transmission. The usual procedure is for transmission oil to be pumped external to the transmission and passed through oil to air heat exchanger (small radiator) or through coils in the bottom tank of the engine cooling radiator.

What runs through transmission cooler lines?

The Role Of Transmission Fluid
This heat is absorbed by the transmission fluid, which is then circulated through the cooler lines to the radiator, where it is cooled and then returned to start anew. Maintaining your ATF’s quality and level is vital to prevent increased friction and overheating.

What is the hose that runs from the transmission to the radiator?

And these hoses connect the transmission cooler to the vehicle’s. Radiator. If your automatic transmission cooler hoses are failing you will see a fluid leak under the vehicle.