How to change wiper blades on a Lexus NX 300?

Changing Wiper Blades on a Lexus NX 300
To change the wiper blades on a Lexus NX 300, you can follow these steps:
1. Gather Essential Tools: Before you begin the process of changing your Lexus NX windshield wipers, you’ll need to gather some essential tools. These include new wiper blades that are compatible with your Lexus NX, a soft cloth or towel, and possibly a pair of pliers.
2. Remove the Old Wiper Blades: Lift the wiper arm away from the windshield until it locks into the service position. Then, press the small tab on the underside of the wiper where it meets the wiper arm. Slide the wiper blade off the arm by pulling downward.
3. Install the New Wiper Blades: Attach the new wiper blades to the wiper arm, making sure it clicks into place. Gently lower the wiper arm back onto the windshield.
4. Test the New Blades: After installing both new wiper blades, it’s essential to test them to ensure that they are working correctly. Turn on your Lexus NX’s wiper function and check that the new blades are clearing the windshield effectively. If the blades aren’t performing as expected, make sure they’re installed correctly or consider replacing them.
5. Dispose of the Old Blades Responsibly: Changing the windshield wipers on your Lexus NX is a simple process that can make a significant difference in your driving experience. By following these easy steps, you can maintain your vehicle’s functionality and ensure your safety on the road. Always make sure to use high-quality wiper blades and dispose of the old ones responsibly.
Remember to ensure that the wiper blades you purchase are compatible with your specific Lexus NX 300 model and year for optimal performance.

How do you change the wiper blades on a Lexus NX300?

To remove the old wiper blades, you need to lift the wiper arm away from the windshield until it stays up on its own. Locate the small tab or button on the underside of the wiper blade where it meets the arm. Depress the tab or button to release the blade from the arm.

How do you lift a Lexus wiper?

Make sure you have your key. Next without putting your foot on the brake press a start button to get it into accessory mode. And then press it again to turn it off then press upwards on the stalk.

How do you change wiper blades?

On the wiper blade assembly press it. And while holding it down gently. Slide the blade off the wiper arm repeat.

How do you put Lexus wipers in service mode?

And push the wiper stock again. So there you could service the wiper stock the wiper blades what have you take it out swap them out clean them.

How do I remove my windshield wipers?

On the wiper blade assembly press it. And while holding it down gently. Slide the blade off the wiper arm repeat.

What size wiper blades for 2018 Lexus NX300?

ABLEWIPE Windshield Wiper Blades fit for Lexus NX300 2018 26″ + 16″ (set of 2), ModelLW2153 – Walmart.com.

How do you pop off wipers?

Put your fingers in between here. Pull it through. Slide it right out just like that very simple.

Do you buy 2 different size wiper blades?

Windshield wiper blades are vehicle specific. On some vehicles, both wiper blades are the same size. On other vehicles, the two wiper blades are different sizes. The optimal wiper blade size is determined by the manufacturer and selected for proper fit to clear as much of the windshield as possible.

How do you remove a Lexus windshield wiper?

So you don’t break the windshield. Then when you look at it there’s a large end and a small end.

What size wiper blades for Lexus NX300?

3 wiper Blades For Lexus NX200t 2015-2017 NX300 2018-2021 NX300h 2015-2022 OEM Quality Replacement Windshield Wiper Blades Set – 26″/16″ /12″Top Lock (Not for J Hook Adapter)