How to change Subaru tail lights?

Steps to Change Subaru Tail Lights
Replacing the tail lights on a Subaru can be a relatively simple task. Here are the general steps to follow:
1. Gather the necessary tools: Before starting, make sure you have the required tools, such as a screwdriver or socket wrench, and the replacement tail light bulbs.
2. Access the tail light assembly: The method for accessing the tail light assembly may vary depending on the specific Subaru model and year. It’s important to familiarize yourself with the connections and how they work before proceeding. Some Subaru models may require removing a panel or accessing the bulbs through the cargo area. For older models, there may be access panels in the corner of the cargo area that can be removed to access the bulb modules. For newer models, the process may involve removing clips from the hatch or trunk.
3. Remove the old tail light bulbs: Once you have accessed the tail light assembly, locate the burnt-out bulbs that need to be replaced. Carefully remove the bulbs by twisting them counterclockwise or by gently pulling them out, depending on the type of bulb.
4. Install the new tail light bulbs: Take the new tail light bulbs and insert them into the empty sockets. Make sure they are securely in place.
5. Test the new tail lights: After installing the new bulbs, turn on the headlights and test the tail lights to ensure they are working properly.
6. Reassemble the tail light assembly: If you had to remove any panels or clips to access the tail light assembly, reattach them securely.
It’s important to note that the specific steps may vary depending on the Subaru model and year. Therefore, it’s recommended to consult the vehicle’s owner’s manual or refer to Subaru-specific resources for detailed instructions tailored to your specific model.
Please keep in mind that if you are not comfortable performing this task yourself, it is always advisable to seek professional assistance or consult a qualified mechanic.
I hope this helps! Let me know if you have any other questions.

Should you replace both tail lights if one goes out?

Each bulb have some sort of life time expectancy so if two lamps are installed at the same time and one fails after a long period of time you can deduce that the other can be close to failure as well so for security some people and manufacturers ($$$$) recommend replacing both at the same time.

Is it hard to replace a taillight cover?

Regardless of why you want to replace your tail light assembly, generally, the procedure is pretty straightforward. On some vehicles, however, the rear bumper cover or interior trim panel must be removed to access the tail light fasteners—and that can make the job more complicated.

Is it hard to change tail lights?

Replacing your car’s tail light bulbs is a simple and straightforward procedure. The rear light bulbs are usually housed in a single unit that’s easy to access from inside the boot. Haynes has full step-by-step information on how to do this. Most tail light bulbs are filled with halogen gas, and are readily available.

Can you replace your own tail light cover?

Use either a Phillips, slotted or, in some cases, a specialized screwdriver — sometimes called a star — to remove the screws holding the lens cover in place. Gently pull out on the lens cover. If it is a two-piece unit — lens cover and light bulb holder — then replace the lens cover and screw it back into place.

Is it OK to drive with a tail light out?

If you have a broken tail light on your vehicle, the broken tail light law means you can get a ticket from a police officer. A broken tail light is considered a non-moving violation and is a ticketable offense similar to a broken muffler or failing to display proper vehicle registration stickers on your license plate.

Are tail lights hard to change?

It’s important to know what to expect with any car maintenance or repair job. Fortunately, tail light bulb replacement isn’t difficult and shouldn’t take you more than 45 minutes to an hour to complete.

Can I change my tail light myself?

Sometimes you need a trim tool if they’re pretty difficult to remove just get in here you don’t want to scratch the paint so it’s a good idea to use plastic. Tools. And then just pull them back.

Does Jiffy Lube change tail lights?

Bring Your Vehicle to Jiffy Lube for Headlight Service
Fog lights. Parking lights. Taillights. Backup lights.

Can AutoZone change your tail light?

While AutoZone doesn’t offer actual brake light replacement services, our team can assist you with any questions about the process, help you find the right products to get started, and maybe even give you a hand. How do you remove a brake light to replace it?

Will O Reilly change my tail lights?

Our parts professionals are experts at installing headlight bulbs and tail light bulbs*, and can quickly and easily change wiper blades while you wait at no cost to you.