How to change serpentine belt on 2007 Toyota Yaris?

Changing the Serpentine Belt on a 2007 Toyota Yaris
To change the serpentine belt on a 2007 Toyota Yaris, you can follow these general steps:
1. Gather the necessary tools: You will need a wrench or socket set to loosen the alternator bolt and a pry bar or belt tensioner tool to release the tension on the belt.
2. Locate the belt tensioner: The Yaris may not have a belt tensioner, so you may only need to loosen the alternator bolt to release the tension on the belt.
3. Loosen the alternator bolt: Use a wrench or socket set to loosen the alternator bolt. This will allow you to move the alternator and release the tension on the belt.
4. Remove the old belt: Once the tension is released, you can easily remove the old serpentine belt from the pulleys.
5. Install the new belt: Route the new serpentine belt around the pulleys according to the belt routing diagram. Make sure it is properly seated on each pulley.
6. Tighten the alternator bolt: Use a wrench or socket set to tighten the alternator bolt, applying the appropriate tension to the belt.
7. Check the belt tension: After tightening the alternator bolt, check the tension of the belt. It should have the right amount of tension, not too loose or too tight.
Please note that these steps are general guidelines and may vary slightly depending on the specific model and engine of your Toyota Yaris. It is always recommended to consult the vehicle’s owner’s manual or a reliable automotive resource for detailed instructions and diagrams specific to your vehicle.
I hope this helps! Let me know if you have any other questions.

Will a broken serpentine belt destroy my engine?

Since the serpentine belt helps provide power to cool the engine, a faulty belt can cause the car engine to overheat as the water pump will not turn. As soon as the engine begins to overheat, have it inspected by a mechanic as it can cause a breakdown and cause engine damage if left overheated.

Does a 2007 Yaris have a serpentine belt?

Notes: Serpentine Belt. Alternator and Water Pump. Multi-V. Except AC.

How much does it cost to replace a belt on a Toyota Yaris?

The average cost for Toyota Yaris Drive Belt Replacement is $85. Drop it off at our shop and pick it up a few hours later, or save time and have our Delivery mechanics come to you.

Do you need a special tool to put on a serpentine belt?

Inexpensive specialty tools greatly simplify changing the serpentine belt. You can replace a serpentine belt with ordinary hand tools. But we don’t recommend it. The spaces are often tight and the belt-driven devices difficult to reach.

Can I replace serpentine belt by myself?

Replacing the serpentine belt is as simple as threading it into position, cranking the tensioner and slipping the belt over the tensioner pulley, or nearest pulley up top. Belt tensioners are mostly spring tension. Once installed, the spring retains pressure to the belt.

Do you need special tools to change a serpentine belt?

A worn or damaged serpentine belt can fail to adequately transfer the power, leaving your alternator, power steering, and air conditioning failing to function. If your serpentine belt needs to be replaced, it can be done using only common hand tools.

How many belts are in a Toyota Yaris?

Most Toyota Yaris’s have 1 or 2 drive belts and in some instances, it may be called a serpentine belt. The belt needs to be flexible to circulate across pulleys and can be made out of perishable compositions like rubber, neoprene or urethane. The drive belt belt/s is positioned on pulleys and operates under tension.

How do you put on a serpentine belt on a 2007 Toyota Yaris?

You just loosen the two alternator bolts (from above), pivot the alternator towards the engine, pull the belt off, put the new on on, and re-tension. sweeet thanks. Just like to say that i just replaced my belt today ($17) for the first time because it started making noise on startup…. Car has over 137k miles on it.

How much does it cost to replace a serpentine belt on a Toyota Yaris?

The average cost for a Toyota Yaris Serpentine Belt Replacement is between $59 and $73. Labor costs are estimated between $38 and $48 while parts are priced between $21 and $25.

What are the symptoms of a bad serpentine belt?

Bad serpentine belt symptoms

• Squeaking, squealing or chirping sound from under the hood of the car.
• Check engine light or battery light is illuminated on your dashboard.
• A/C isn’t working.
• Power steering isn’t working.
• The engine’s temperature is high or overheating.
• Smell of burnt rubber.