Changing Lights on a Subaru Forester
To change the lights on a Subaru Forester, follow these general steps:
1. Identify the Bulb Type: Determine the type of bulb your Subaru Forester uses. The bulb type can include H11, 9003, 9005, and more, and this information can be found printed on the side of the bulb, in the service manual, or by shopping online.
2. Access the Headlight Assembly: Open the hood of the Subaru Forester and turn on the headlights to identify which one needs to be replaced. Depending on the year of the vehicle, you may need to remove or loosen any items, like the battery, that restrict access to the backside of the headlight assembly.
3. Replace the Bulb: Once you have access to the headlight assembly, locate the wired plugs connected to the electrical blades of the halogen headlight. Remove the plugs by wiggling them off, and mark them to replace correctly onto the new bulb. Then, replace the black rubber cover in the same fashion it was removed.
4. Additional Considerations: For specific types of lights, such as brake lights or fog lights, the replacement process may vary slightly. For example, to replace a Subaru Forester brake light, you will need a replacement bulb, a Phillips head screwdriver, and possibly a plastic pry bar. It’s important to determine which light needs to be replaced before buying a new bulb.
It’s worth noting that the latest generation Subaru Forester is equipped with LED DRL’s and headlights, which are best left to a dealership to replace. However, for 2012 to 2018 models equipped with HID-style bulbs, the replacement process can be completed in a matter of minutes.
Always refer to the specific instructions in the vehicle’s manual for the most accurate guidance on changing the lights.
Contents
- How do I change the light in my headlights?
- Does AutoZone do headlight bulb replacements?
- How much does it cost to replace a headlight on a Subaru Forester?
- How do you remove a Subaru headlight?
- Can AutoZone replace a headlight bulb?
- Can I replace a headlight bulb myself?
- Will AutoZone replace a headlight for me?
- Can I replace my headlight myself?
- How to replace a headlight on a Subaru Forester?
- Is it hard to replace headlight housing?
How do I change the light in my headlights?
How to Safely Change a Headlight
- Find gloves to wear.
- Determine which headlight bulb you need.
- Turn off your vehicle.
- Pop the hood and locate the headlight holder.
- Disconnect the power wires Usually, there will be three of them to disconnect.
- Remove the old bulb.
- Replace with a new bulb.
- Test the bulb.
Does AutoZone do headlight bulb replacements?
Luckily, if both or even just one headlight bulb seems to be dying, AutoZone has the quick-fix to get you back on the road quickly.
How much does it cost to replace a headlight on a Subaru Forester?
The average cost for Subaru Forester Headlight Bulb Replacement is $109.
How do you remove a Subaru headlight?
So this is super simple procedure. Everyone can do this this is the simplest car ever. So let’s do this find the Lash move it to the left raise. The hood up it should stay. Now.
Can AutoZone replace a headlight bulb?
Luckily, if both or even just one headlight bulb seems to be dying, AutoZone has the quick-fix to get you back on the road quickly.
Can I replace a headlight bulb myself?
The wire socket. And you’re good to go repeat. Those steps on the other side. And then check and make sure that your headlights are working before you close your hood.
Will AutoZone replace a headlight for me?
Going to a dealership or repair shop will usually cost you more than just the cost of the headlights because you’ll also have to pay for the technician’s time. However, if your headlight is easily accessible to an installer, AutoZone will replace it.
Can I replace my headlight myself?
You’ll want to detach the wire socket from the bulb. Just press the tab to release it. And pull on the socket. Be careful to pull on the socket. And not the wires.
How to replace a headlight on a Subaru Forester?
The pins reattach the dust cover. And reattach the plug. Voila we have light.
Is it hard to replace headlight housing?
On some models of car replacing the headlight assembly is very straight forward and can be done in your driveway in a matter of minutes. However, many automobiles require that you would have to go to the extreme of entirely removing the front bumper or other components of your vehicle to be able to do so.