How to change brakes on 2014 Chevy Silverado?

Introduction
To change the brakes on a 2014 Chevy Silverado, you will need to follow a few steps. Properly functioning brakes are essential for your safety and the safety of others on the road. Here’s a general guide on how to replace the brake pads on a 2014 Chevy Silverado.
Steps to Change Brakes on a 2014 Chevy Silverado
1. Gather the necessary tools and materials, including a lug wrench, jack, jack stands, C-clamp, brake cleaner, new brake pads, and potentially new rotors if needed.
2. Park the vehicle on a level surface and engage the parking brake.
3. Loosen the lug nuts on the wheel you will be working on, but do not remove them yet.
4. Use a jack to lift the vehicle off the ground and secure it with jack stands.
5. Remove the lug nuts and take off the wheel.
6. Locate the brake caliper, which is usually held in place by bolts or pins.
7. Remove the bolts or pins to release the caliper from the brake rotor.
8. Carefully remove the caliper and set it aside, being mindful not to damage the brake hose.
9. Use a C-clamp to compress the caliper piston back into its housing. This will create enough space to install the new brake pads.
10. Remove the old brake pads from the caliper bracket.
11. Clean the caliper bracket and rotor with brake cleaner to remove any dirt or debris.
12. Install the new brake pads into the caliper bracket, ensuring they are properly aligned.
13. Place the caliper back over the brake pads and secure it with the bolts or pins.
14. Repeat the process for the other brake caliper on the same axle.
15. Put the wheel back on and tighten the lug nuts.
16. Lower the vehicle to the ground and tighten the lug nuts fully.
17. Repeat the process for the other axle if necessary.
18. Before driving, pump the brake pedal a few times to ensure proper brake pad contact with the rotors.
19. Test the brakes in a safe area to ensure they are functioning correctly.
Please note that this is a general guide, and it’s always recommended to consult the vehicle’s owner’s manual or seek professional assistance if you are unsure or unfamiliar with the process.
Source: [[5]]
I hope this information helps you with changing the brakes on your 2014 Chevy Silverado! Let me know if you have any further questions.

What happens if you replace brake pads without turning the rotors?

Having a fresh rotor for the new brake pad to grab onto means the driver will experience optimal braking performance. If the old rotors are kept on the vehicle, you run the risk of the pads wearing improperly. This can lead to the premature replacement of the brake pads which will be costly for the customer.

How much does it cost to replace brakes on a Chevy Silverado?

Chevrolet Silverado 1500 Front Brake Pads Price
Typically the cost for parts will range from $100-$200 per axle and labor can cost anywhere between $80 – $100.

How long do brakes last on a 2014 Chevy Silverado?

The actual number of miles that brakes last is difficult to estimate because many factors affect the life of your vehicle’s brakes. The general lifespan is between 25,000 and 65,000 miles.

Do you have to bleed brakes after changing pads?

Do You Need to Bleed Brakes After Changing Pads? Yes, you will need to bleed your car’s brakes after changing its brake pads. This helps to remove any dirt in the braking system. It’s common for people to open both the bleeder valve and squeeze calipers while changing the brake pads.

How long do brake rotors last on a Chevy Silverado?

70,000 miles
Chevrolet Silverado 1500 rotors should be replaced at or before 70,000 miles but rotors may quickly degrade even faster depending on your driving habits and an assortment of other factors.

Can I change the brake pads myself?

Your brakes help you slow down and stop your vehicle, and brake pads are an important part of the system. Over time, brake pads wear out and eventually need replacing. Fortunately, you can often get the job done yourself with the right tools and materials.

How do I know if my truck brakes are bad?

Brake Warning Signs

1. Thin brakes pads. Brakes pads squeeze against a rotor located in the front wheels, providing the friction that stops your car.
2. Squealing sounds.
3. Poor performance.
4. Vibration.
5. Puddles on the driveway.
6. Pulling.
7. Loud metallic sounds.
8. Warning lights.

How do you tell if you need new rotors or just brake pads?

The 10 most common signs that you may need new rotors include:

1. Squealing sounds from the brakes.
2. Longer stopping time.
3. Steering wheel vibrates when braking.
4. Brake pedal pulsates when braking.
5. Banging sounds when braking.
6. Scratched, scored, or grooved rotors.
7. Large edge on the rotor’s surface.
8. Blue color on rotors.

Are brakes hard to replace yourself?

Changing your brakes is a fairly simple process for the avid DIYer and we’d rate it a 2 out of 5 wrenches in difficulty. Depending on what vehicle you have, this project could take between 45-2 hours.

Is it cheaper to replace front or rear brakes?

Your front brakes do the majority of the braking in the car, usually about 70%. These brakes pads often get overheated, and can in turn squeak, groan or grind. The average front brake pad replacement cost is between $115 and $300, this is about the same as the cost of rear brake pad replacements.