Steps to Change Brake Discs on a Ford Transit
To change the brake discs on a Ford Transit, you can follow these general steps:
1. Prepare your workspace and gather the necessary tools: Before you start the replacement process, make sure you have all the tools and materials you need. This includes a specific set of tools for the job, such as a torque wrench, a long Torx T50 for the hub bolts, and M10 100mm long bolts to push the hub out .
2. Remove the old brake discs: Begin by removing the old brake discs. This typically involves removing the wheel, caliper, and caliper bracket. You may need to use a brake caliper piston tool to retract the piston and make it easier to remove the caliper.
3. Inspect and clean the components: Take the time to inspect the brake components for any signs of damage or wear. Clean the mounting surfaces and ensure they are free of debris or rust. This will help ensure a proper fit for the new brake discs.
4. Install the new brake discs: Position the new brake disc on the hub and secure it in place. Follow the manufacturer’s instructions for torque specifications and any additional steps required for proper installation .
5. Reassemble the brake system: Once the new brake discs are in place, reassemble the brake system by reinstalling the caliper and caliper bracket. Make sure all bolts are tightened to the specified torque values.
6. Repeat the process for the other brake discs: If you are changing the brake discs on both the front and rear axles, repeat the above steps for the remaining discs.
It’s important to note that these steps provide a general overview of the process, and the specific steps may vary depending on the model and year of your Ford Transit. It’s always recommended to consult the vehicle’s manual or seek professional assistance if you are unsure about any step of the process.
Remember, safety is paramount when working on your vehicle’s braking system. If you are not confident in your abilities or lack the necessary tools, it’s best to consult a professional mechanic.
I hope this helps! Let me know if you have any other questions.
Contents
- How often do you need to change brakes on a Ford Transit?
- Is it difficult to replace brake discs?
- How long does it take to change brakes on a van?
- How much is a brake job on a Ford Transit van?
- Do you need to replace all 4 brakes at once?
- What are the symptoms of a bad brake disc?
- How much does it cost to replace brakes on a Ford Transit?
- Can I change my own brake discs?
- Should you change both brake discs at the same time?
- Should you change all brake discs at once?
How often do you need to change brakes on a Ford Transit?
30,000 – 60,000 miles
Wear and tear on your brakes depends considerably on your driving habits and the type of brake pads your Ford Transit Cargo Van has, but frequently front brakes wear out before rear breaks at 30,000 – 60,000 miles because they are ordinarily under much less stress.
Is it difficult to replace brake discs?
Both brake pads and brake discs are consumables. They must be regularly replaced to ensure proper operation of the brakes. The replacement procedure is not complicated; however, to ensure that it is done properly, a good idea is to have it done by professional mechanics.
How long does it take to change brakes on a van?
Typical Brake Service Times. When carried out by experienced technicians, the most common types of brake maintenance and brake repair take between 15 minutes and 1 hour.
How much is a brake job on a Ford Transit van?
Since your Ford Transit Cargo Van brake pads wear down at the same rate per axle, it is common to have your front or rear brake pads replaced at the same time. Typically the cost for components will range from $100-$200 per axle and labor can cost anywhere between $80 – $100.
Do you need to replace all 4 brakes at once?
Typically, you should have both your front brake pads replaced at the same time, and your rear pads replaced at the same time, to ensure proper braking power. Of course, to make it easier on yourself with one simple visit, rather than two to four visits, you may want to replace all four brake pads at the same time.
What are the symptoms of a bad brake disc?
Some common symptoms of bad rotors include vibration or pulsation in the steering wheel, high-pitched squealing noise when braking, shaking steering wheel, brake pedal pulsing, vehicle taking a long time to stop, loud bangs while braking, large edges on the outer part of the brake rotor, and scratch marks on the rotor.
How much does it cost to replace brakes on a Ford Transit?
Ford Transit Centre Repair Pricing
| Repair | Fiesta Van | All-New Transit Van |
|---|---|---|
| Replace front brake discs and pads | £186.00 | £390.00 |
| Replace front brake pads | £90.00 | £159.00 |
| Replace rear brake pads/shoes | £126.00 | £170.00 |
| Replace rear brake discs and pads | N/A | £350.00 |
Can I change my own brake discs?
While replacing your brake discs is a relatively straightforward job, there are quite a few steps to follow and you need to be careful to ensure nothing goes wrong. If you are in any doubt, contact a qualified mechanic.
Should you change both brake discs at the same time?
Your brake pads and discs work in harmony to make sure that you come to a safe stop when braking, so it’s always preferable to replace them at the same time. By replacing both pads and discs simultaneously, you can improve your car’s performance and the life of your brakes.
Should you change all brake discs at once?
Brake discs in bad condition can not only cause decreased brake performance but also cause brake noise. DIXCEL recommends changing your discs and pads at the same time.
