How to change a TYRE on a Toyota Highlander?

How to Change a Tire on a Toyota Highlander
Changing a tire on a Toyota Highlander is a relatively simple process. Here is a step-by-step guide to help you:
1. Prepare for the tire change: Find a safe location to park your vehicle away from traffic. Engage the parking brake and turn on the hazard lights. If available, use wheel chocks to secure the wheels opposite the one you are changing. Retrieve the necessary tools, including the spare tire, jack, and lug wrench.
2. Locate the spare tire: In most Toyota Highlanders, the spare tire is located under the cargo area floor. Open the cargo area and look for a compartment or well where the spare tire is stored.
3. Remove the flat tire: Use the lug wrench to loosen the lug nuts on the flat tire, but do not remove them completely at this stage. Place the jack in the designated lifting point near the flat tire and raise the vehicle until the flat tire is off the ground. Finish removing the lug nuts and carefully take off the flat tire.
4. Install the spare tire: Align the holes in the spare tire with the wheel studs and push it onto the hub. Hand-tighten the lug nuts as much as possible.
5. Lower the vehicle: Use the jack to lower the vehicle until the spare tire touches the ground, but do not fully remove the jack yet.
6. Tighten the lug nuts: Use the lug wrench to tighten the lug nuts in a star or crisscross pattern. This ensures even tightening and prevents wheel imbalance. Fully lower the vehicle and remove the jack.
7. Check the tire pressure: After changing the tire, it is important to check the tire pressure of the spare tire. Make sure it is inflated to the recommended pressure.
8. Replace the flat tire: Store the flat tire, jack, and tools in the designated compartments or wells in the cargo area. Take the flat tire to a professional tire shop for repair or replacement.
Remember, these steps are a general guide, and it’s always a good idea to consult your vehicle’s owner’s manual for specific instructions and safety precautions.
I hope this helps! Let me know if you have any other questions.

Where is the spare tyre in a Toyota Highlander?

The Toyota Highlander’s spare tire is locked to the rear underbelly of the vehicle, close to the back bumper.

What to do if you lose your wheel lock key?

If you know who made your wheel locks, your best bet is to contact the manufacturer and order a replacement key. Some wheel lock sets come with a code that identifies them for the manufacturer so they can verify that you’re the owner. This allows them to provide you with the exact key for your locks.

How do you get the spare tire off a 2018 Toyota Highlander?

In front of it hold it up. And then if we look right here we’re gonna see it’s a few tools um the the lug nut wrench and a few other things in this compartment. Here will be the jack.

Does a Toyota Highlander have a spare tire?

Thankfully, the spare tire is fairly easy to locate in the Toyota Highlander. First, you’ll need to pop the tailgate to your Highlander. Next, you’ll want to lift your trunk mat cover. Underneath you’ll find all the tools needed to replace the spar tire.

Do I have to replace all 4 tires on Toyota Highlander?

AWD System Damage: The difference in diameter of the tires can cause an AWD system to catch up on the dry pavement. This can sometimes damage the system. That is why almost every all-wheel-drive vehicle manufacturer recommends changing all tires simultaneously.

How do I take my tire off my car?

Use this to spray the lug nuts. And the edge where the wheel sits on the central Hub. Wait for some 15 minutes. And then try to get the wheel loose Again by giving it a slight Punch or kick.

Where is Toyota Highlander wheel lock key?

The first location is the glove compartment. The second location is in a separate compartment under the trunk Toyota depending on the model the wheel lock key is located in the glove box or inside the

How do you remove a Toyota TYRE?

Once the jack is in place jack up the vehicle until the flat tire easily clears the road. You can then remove all the wheel nuts. And the flat tire.

Where is the wheel lock key located?

Around the spare tire. It is important that you leave the key in that position or in this location. So our technicians know where to find. It you.

How do you change a tire step by step?

Below, I’ve broken down how to change a tire in 10 simple steps.

1. Find a Safe Place to Pull Over.
2. Check for Materials.
3. Loosen the Lug Nuts.
4. Lift Your Vehicle Off the Ground.
5. Remove the Lug Nuts and the Tire.
6. Place the Spare Tire on the Car.
7. Replace the Lug Nuts.
8. Lower Your Vehicle and Begin Tightening.