How to add antifreeze to a Dodge Journey?

To add antifreeze to a Dodge Journey, you can follow these steps:
1. Check the owner’s manual: Before adding antifreeze, it’s important to consult the owner’s manual of your Dodge Journey. The manual will provide specific instructions and recommendations for adding coolant/antifreeze, including the correct type of fluid to use and the proper fluid capacities for your vehicle.
2. Locate the coolant reservoir: The coolant reservoir in a Dodge Journey is where you will add the antifreeze. The exact location may vary depending on the year and model of your vehicle. To find the coolant reservoir, you can refer to the owner’s manual or watch instructional videos available online .
3. Check the coolant level: Before adding antifreeze, it’s important to check the coolant level in the reservoir. The engine should be cool to the touch when checking the coolant level. If the level is low, you will need to add antifreeze.
4. Mix the antifreeze: It is recommended to mix the antifreeze with distilled water in a 50% coolant and 50% water ratio. This mixture provides the optimal protection against freezing and overheating.
5. Add the antifreeze: Once you have the correct type of antifreeze and have mixed it with distilled water, you can add it to the coolant reservoir. Be careful not to overfill the reservoir. It’s important to add the antifreeze slowly and allow any air bubbles to escape.
Remember, it’s always best to consult the owner’s manual for specific instructions and recommendations for your Dodge Journey. If you’re unsure or need further assistance, it’s recommended to consult a professional mechanic or contact the manufacturer for guidance.
I hope this helps! Let me know if you have any other questions.

Do you put antifreeze and coolant in the same place?

Does antifreeze go in the engine coolant? Once mixed with water, you simply pour antifreeze into the same place as the engine coolant: the expansion tank, or reservoir. It will then filter ’round the engine and mix with your coolant to make sure the liquid does not freeze.

How do I know if I need coolant or antifreeze?

Critical Signs that Your Vehicle Requires a Coolant Service
Leaking coolant. Overheating engine. Steam coming from under the hood. Radiator fluid that is dirty or rusty in color.

What happens if coolant is low?

Low coolant makes it harder to drive in hot weather and sub-zero temperatures. Low coolant also causes your engine to burn fuel more quickly. You will notice symptoms such as poor fuel economy, a loss of acceleration, and the car’s high-temperature gauge getting close to the red if your car is low on coolant.

What color of antifreeze does a Dodge Journey take?

What color coolant does Dodge Journey use? It’s big to understand that color doesn’t matter. While most Organic Acid Technology (OAT) coolants are usually orange, yellow, red or purple, Hybrid Organic Acid Technology (HOAT) coolants are orange and yellow.

How do I know if my car needs antifreeze?

How to Know if Your Car Needs Coolant

• Warning light on the dash.
• A sweet smell coming from the engine.
• Reduced gas mileage.
• Puddle under your car with orange, green, or pink fluid.
• The heater isn’t working properly.
• The temperature gauge needle is inaccurate.

Can I just add antifreeze to my car?

If the coolant level is low, add the correct coolant to the reservoir (not the radiator itself). You can use diluted coolant by itself, or a 50/50 mixture of concentrated coolant and distilled water. When coolant rises to the cold fill line, replace cap and tighten it until you feel it click.

How do you add coolant to a Dodge?

If you need it. So as we showed you the engine coolant compartment is over here. And we can basically just open up this little plug here. And it’s going to give us a look inside of the reservoir.

What coolant goes in a Dodge Journey?

ZEREX – G05 50/50 Ready-to-Use Antifreeze / Coolant, 1 Gallon (Part No. ZXG05RU1)

Should I pour coolant directly into the radiator?

On all vehicles that have a reservoir you add it to the reservoir, unless it is totally empty, then you can add it to the radiator directly. Once the radiator is full you will want to finish topping it off through the reservoir. If you just need to add because it is loww, then always use the reservoir.

Can I just add coolant to my car without flushing?

Adding Coolant Without Flushing: Is it Safe? It’s generally safe to add coolant without flushing the entire system [2].