How often does a Subaru need a timing belt?

Timing Belt Replacement for Subaru Vehicles
Subaru vehicles typically require timing belt replacement at specific mileage intervals to ensure the proper functioning of the engine and prevent potential damage. The recommended timing belt replacement interval for Subaru vehicles can vary, but it is generally advised to replace the timing belt at 105,000 miles. This recommendation is based on the fact that the timing belt is a crucial component, and failure to replace it at the recommended interval can lead to serious engine damage.
Importance of Timing Belt Replacement
The timing belt plays a crucial role in ensuring the proper operation of the engine. In Subaru vehicles, the timing belt is responsible for synchronizing the opening and closing of the engine’s valves with the crankshaft’s position, which is essential for the engine’s functionality. It is particularly important to replace the timing belt at the recommended interval to prevent potential engine damage, as Subaru engines are interference engines. In the event of a timing belt failure, the valves and pistons may collide, leading to significant damage and potentially requiring costly repairs or even engine replacement .
Frequency of Replacement
The frequency of timing belt replacement for Subaru vehicles is typically recommended at 105,000 miles or every 7 years, whichever comes first. This recommendation is based on the degradation of the rubber material used in the timing belt, which can occur over time. It is important to adhere to these replacement intervals to ensure the longevity and proper functioning of the vehicle’s engine.
Conclusion
In conclusion, the timing belt in Subaru vehicles should be replaced at the recommended interval of 105,000 miles or every 7 years to prevent potential engine damage and ensure the continued reliability of the vehicle. It is advisable to consult the owner’s manual for specific recommendations based on the vehicle’s model and year .
If you have any further questions or need additional information, feel free to ask!

What is the longest a timing belt will last?

In the old days, a timing belt might only last around 40,000 to 60,000 miles. However, because of advances in materials science, modern timing belts usually last 80,000 to 100,000 miles.

Will a timing belt last 200000 miles?

The best guide would be the car handbook to see what the manufacturer mileage recommendations are. It is safer to replace the timing belt even earlier than the manufacturer recommends. In general, however, timing belts needs to be replaced from 60,000 miles up to 150,000 miles.

Do Subarus have timing belt issues?

Subaru has a recommended timing belt service interval of 105,000 miles, however there have been cases where timing belt failure has happened at just 25,000 miles. Inspection of the timing belt is recommended every oil service to aid with early detection.

How long does a Subaru timing chain last?

Timing BELTS are required to be replaced every 100k. Timing CHAINS, which you have, are generally good for the life of the engine. Just change your oil and you’re good. Timing belts (not chains) should be replaced approximately every 100k miles.

How much does it cost to replace a timing belt in a Subaru?

Shopping around to get a few quotes is your best bet to get the best deal, but you can expect to pay anywhere from $409 to $919 (including parts and labor). Have a timing chain instead of a timing belt? Lucky you, because they can actually last the lifetime of your car.

How long do Subaru timing belts last?

We at Subaru Clinic recommend you replace your timing belt at 105,000 miles. That said, check your owner’s manual for recommendations.

Can a timing belt last 20 years?

Seven years is the maximum life of the timing belt recommended by most manufacturers. For example, the belt should be replaced even if the engine has only 30,000 miles but is seven years of age. More timing belts break due to age than mileage.

When did Subaru switch from timing belt to chain?

2011
Subaru engines used belts , except for the boxer ez. 3.6 and diesel engines until about 2011. 2012-up 4th generation Subaru used chains and on newer engines.

What are signs of a bad timing belt?

Signs Your Timing Belt Needs to be Replaced

• Ticking noise from under the hood when the engine is running.
• The engine doesn’t start.
• The engine misfiring while driving.
• Oil leaking from the front-side of where the motor is under the hood.
• Hydroplaning while driving in wet weather conditions.
• Check engine light is on.

Does Subaru use a timing belt or timing chain?

Depending on what kind of engine your Subaru has, it may be equipped with either a timing belt or a timing chain. These two parts serve the same function, but require different attention. A timing belt is rubber-based, and will need to be replaced at certain maintenance intervals.