How often do Subaru timing belts break?

How often do Subaru timing belts break?
Subaru timing belts can break if they are not replaced within the recommended interval. The recommended replacement interval for Subaru timing belts is typically every 60,000 to 105,000 miles, depending on the model and year of the vehicle [[3]] [[8]]. It is important to note that timing belts rarely give any indications of imminent failure, so neglecting to replace them can lead to serious engine damage if the belt breaks while the engine is running . Therefore, it is crucial to follow the manufacturer’s recommendations and replace the timing belt within the specified mileage or time interval to avoid potential damage to the engine [[7]].

Should I replace my water pump with the timing belt?

As already mentioned, all components are subject to the same mileage and wear. Therefore, all components in the synchronous drive should always be replaced at the same time. The timing belt drives the water pump, both systems work together and if one of them fails, the risk of serious damage to the engine is higher.

At what mileage does a timing belt fail?

A timing belt should be routinely changed, just like the engine filter or other similar car parts. Now that technology has improved, timing belts don’t need to be changed as often as in previous decades, but you should still book an appointment to replace the belt between 60,000 and 100,000 miles.

How much does it cost to replace a timing belt on a Subaru?

Shopping around to get a few quotes is your best bet to get the best deal, but you can expect to pay anywhere from $409 to $919 (including parts and labor). Have a timing chain instead of a timing belt? Lucky you, because they can actually last the lifetime of your car.

What happens when a Subaru timing belt breaks?

A failing timing belt may show a myriad of symptoms, such as noises coming from the front of the vehicle, engine misfires, and decreased engine performance. In many situations, if the timing belt breaks, the engine will no longer run, and the engine will not restart without replacing the timing belt.

How likely is my timing belt to break?

Time is perhaps more important than miles. Seven years is the maximum life of the timing belt recommended by most manufacturers. For example, the belt should be replaced even if the engine has only 30,000 miles but is seven years of age. More timing belts break due to age than mileage.

Will a timing belt last 200000 miles?

The best guide would be the car handbook to see what the manufacturer mileage recommendations are. It is safer to replace the timing belt even earlier than the manufacturer recommends. In general, however, timing belts needs to be replaced from 60,000 miles up to 150,000 miles.

Do Subarus have timing belt issues?

Subaru has a recommended timing belt service interval of 105,000 miles, however there have been cases where timing belt failure has happened at just 25,000 miles. Inspection of the timing belt is recommended every oil service to aid with early detection.

How long do Subaru timing belts last?

seven years
Timing belt replacements:
Subaru timing belts need to be replaced after seven years or 105,000 miles; whichever comes first. Replacement cost starts at $530 (will vary by model)

Do timing belts break without warning?

Timing belts and timing chains generally give no warning when they break. This is why manufacturers recommend replacing them at regular intervals, typically 100,000 miles, though some are less. A broken timing chain or belt will leave you stranded. And may ruin your engine.

What mileage do timing belts break?

between 40,000 and 100,000 miles
Cambelts or timing belts usually need to be replaced, usually between 40,000 and 100,000 miles. Alternatively, for lower mileage cars, the belt is advised to be replaced around four or five years. However, it all depends on the car and manufacturer.