AHG Auto Service » Make » Ford » How much vinyl wrap do I need for a Ford Mustang?

How much vinyl wrap do I need for a Ford Mustang?

To determine how much vinyl wrap you need for a Ford Mustang, you can use a simple formula: length of your vehicle x 3 (for the two sides & the top of the vehicle from front to back) + extra for bumpers and mistakes (5 to 15 depending on the complexity of the car and your skill level).
For example, let’s consider a 2016 Ford Mustang, which is 188 inches long. Using the formula, we can calculate the amount of vinyl wrap needed as follows:
(188 x 3) + 10″ = 47″ + 10″ = 57″
The closest roll size available is a 4.98ft x 59ft roll, so you would need to purchase a 4.98ft x 59ft roll of vinyl wrap for a 2016 Ford Mustang.
Please note that the amount of vinyl wrap needed may vary depending on the complexity of the car and your skill level. It’s always a good idea to round up to the closest roll size available and consider purchasing a little extra for any mistakes or unforeseen circumstances.
Remember to measure each part of your vehicle to ensure accuracy and to consult the specific measurements provided by the vinyl wrap manufacturer or supplier for your Ford Mustang model [[4]] [[7]].
I hope this helps! Let me know if you have any other questions.

How many inches does it take to wrap a car?

The average car requires a 25-foot roll of 60-inch wide vinyl wrap. Narrower rolls are available, but this will require making a seam, quite the trick for a first-timer.

Is it hard to wrap your own car?

Hence we conclude that wrapping a car with vinyl is a hard job especially if you are planning to do it yourself. If the application is done with proper preparation and planning, then the outcome will be a seamless positioning of vinyl over the automobile but this requires a lot of laborious toil and time.

Is it cheaper to paint or vinyl wrap?

Cost Comparison Between Car Wrap vs Paint
On average, wrapping a car will cost you about $2,000. On the other hand, painting a car will cost you about $3,500. So, if you’re looking to save money, then wrapping your car is the way to go.

What’s the best vinyl wrap for cars?

Some of the most popular brands for car wrapping are 3M, Avery Dennison, Hexis, KPMF, Orafol, and Metro Wrap. These companies make high-quality vinyl that is resistant to fading and scratches.

How do I figure out how much wrap I need for my car?

How to Measure for a Wrap

  1. Full wraps on sedans, including bumpers: Multiply the length by four.
  2. Full wraps on sedans without bumpers: Multiply the length by 3.25.
  3. Full wraps on trucks, including bumpers: Multiply the length by 3.75.
  4. Full wraps on trucks without bumpers: Multiply the length by three.

Is vinyl wrapping a car cheaper than painting?

After obtaining quotes from various body shops, the impression people get is that a vinyl wrap would be a simple solution to their problem. A roof or hood could cost around $300 to wrap, which is often only 1/4 the cost to have a body shop strip and repaint the same area.

What is the downside of wrapping a car?

The vinyl wears away over time, as the glue hardens. There are also lots of strict rules surrounding the upkeep. Vinyl wrapped cars cannot spend too long in the sun. Any pollutants or contaminants, such as bird droppings, tree sap or mud needs to be cleared off immediately.

How much vinyl wrap is usually enough for a car?

Estimates of Cars
As a general guideline, a small automobile will require between 50 and 75 feet of vinyl wrap, a mid-size car between 75 and 100 feet, and a big car between 100 and 125 feet. These estimates are for a full wrap covering the entire vehicle.

How many square feet of wrap do I need to wrap my car?

According To The Rule Of Thumb, 10 Inches Of Length Is Equal To 1 Square Foot Of Material. So if your vehicle is 20-feet long, then you’ll need 20 square feet of material. The same goes for height. If your vehicle is 7-feet high, then you’ll need 7 square feet of material to cover it completely.

How much vinyl is needed to wrap a Mustang?

Just like the first, the second, third and fourth generation Ford Mustang also require around 15 yards of vinyl wrap (10 yards for the two sides and 5 yards for the remaining car) with their measurements being approximately 175 inches, 179.6 inches, 181.5 to 183.5 inches in length.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment