How much transmission fluid does a Chevy HHR hold?

Transmission Fluid Capacity for Chevy HHR
The transmission fluid capacity for a Chevy HHR depends on the specific model and engine size. According to the owner’s manual for a 2008 LS panel model with a 2.2L automatic transmission, the complete drain and fill requires approximately 6.9 quarts of transmission fluid. However, if you are only changing the transmission filter, the torque converter would hold around 2-3 quarts in addition to the 6.9 quarts for the drain and fill.
Please note that the transmission fluid capacity may vary for different model years and engine sizes. It is always recommended to consult the owner’s manual for the specific information regarding your Chevy HHR.
Type of Transmission Fluid for Chevy HHR
The recommended type of transmission fluid for a Chevy HHR depends on the model year and engine size. Unfortunately, the search results did not provide specific information about the recommended transmission fluid for the HHR. However, it is important to use the correct type of transmission fluid to ensure proper performance and longevity of the transmission.
To determine the recommended transmission fluid for your Chevy HHR, I recommend referring to the owner’s manual or contacting a Chevrolet dealership for accurate and up-to-date information.
I hope this helps! Let me know if you have any other questions.

How many quarts does it take to fill up transmission fluid?

In general, transmissions take about 9 to 13 quarts to fill completely. The amount of transmission you add will vary, depending on whether you are draining or replacing it all or you are just topping it up. Again, you should avoid adding too much.

What happens if you overfill transmission fluid?

Excessive fluid prohibits proper lubrication and cooling and slows the rotating crankshaft, similar to the effect of running through water. When the air above mixes with the high levels of fluid, it creates a foamy substance that saturates the transmission. This can lead to: Part pitting.

Is it OK to add new transmission fluid to old transmission fluid?

Yes, you can add transmission fluid without changing it. However, it is important to keep in mind that adding new fluid to old fluid may not always be the best solution.

How many quarts does a 2009 HHR take?

Capacity: With filter 5 quarts. After refill check oil level.

How many quarts of transmission fluid do I need for a drain and fill?

How Much Transmission Fluid Do I Need in My Car?

City Car, Family Car, Sedan	1.8 – 10.3 US quarts
Microcar	2.5 – 6.3 US quarts
Minivan, Crossover Utility Vehicle (CUV)	2 – 9.7 US quarts
Pickup, Commercial Vehicle	2.2 – 12 US quarts
Sports Utility Vehicle (SUV), Subcompact Car	3.5 – 17.1 US quarts

How much transmission fluid does a 2010 Chevy HHR take?

For Automatic Transmission: 4T45-E….AF6

Capacity:	4 speed 4T45-E Total Fill 12.9 quarts.
Capacity:	7 quarts Initial Fill.

What is the transmission fluid capacity?

Vehicles require an average of 4 to 17 US gallons (3.8 to 16 liters) of transmission fluid to fill; the majority of automobiles contain between 12 and 16 quarts (11.3 to 15.1 liters), depending on the car’s manufacture and other criteria.

Do you leave the car running when adding transmission fluid?

Yes it should be running. Why? Because the proper way to check the level of fluid in the tranny is to have it …the tranny …at normal operating temperature with the engine running and the gear selector in the proper position (usually “drive” or “park”) … most times it will tell you on the dip stick.

How many quarts of transmission fluid does a 2008 Chevy HHR take?

Automatic Transmission Fluid
Capacity: 7 quarts Initial Fill.

How much transmission fluid do you need for a transmission flush?

Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.