How much transmission fluid does a Chevy Cobalt hold?

The transmission fluid capacity of a Chevrolet Cobalt depends on the type of transmission it has.
For models with a 4-speed automatic transmission, the manufacturer recommends using Dexron VI automatic transmission fluid. The total transmission fluid capacity for a completely drained transmission is not specified in the search results. However, it is important to note that the fluid capacity may vary depending on the specific model year and engine configuration of the Chevy Cobalt. It is always best to consult the owner’s manual or contact a Chevrolet dealership for the most accurate and up-to-date information on fluid capacities for your specific vehicle.
Please keep in mind that the information provided is based on search result snippets and may not cover all possible scenarios or variations. It is always a good idea to consult the owner’s manual or contact a certified Chevrolet dealership for precise information regarding your vehicle.

How many quarts of transmission fluid does a Chevy Cobalt hold?

12.9 quarts
Automatic Transmission Fluid
Capacity: 4 speed 4T45-E Total Fill 12.9 quarts.

What transmission fluid goes in a Chevy Cobalt?

Castrol – Transmax ATF DEXRON®-VI Automatic Transmission Fluid 1 Quart (Part No. 15B1A0)

Do you leave the car running when adding transmission fluid?

Yes it should be running. Why? Because the proper way to check the level of fluid in the tranny is to have it …the tranny …at normal operating temperature with the engine running and the gear selector in the proper position (usually “drive” or “park”) … most times it will tell you on the dip stick.

What happens if you overfill transmission fluid?

Excessive fluid prohibits proper lubrication and cooling and slows the rotating crankshaft, similar to the effect of running through water. When the air above mixes with the high levels of fluid, it creates a foamy substance that saturates the transmission. This can lead to: Part pitting.

How much transmission fluid do I need in a 2008 Chevy Cobalt?

Capacity: 4 speed 4T45-E Total Fill 12.9 quarts. Capacity: 7 quarts Initial Fill.

How many quarts does it take to fill up transmission fluid?

In general, transmissions take about 9 to 13 quarts to fill completely. The amount of transmission you add will vary, depending on whether you are draining or replacing it all or you are just topping it up. Again, you should avoid adding too much.

How much transmission fluid do I need for a 2010 Chevy Cobalt?

For Automatic Transmission: 4T45-E….AF6

Capacity:	4 speed 4T45-E Total Fill 12.9 quarts.
Capacity:	7 quarts Initial Fill.

What is the transmission fluid capacity?

Vehicles require an average of 4 to 17 US gallons (3.8 to 16 liters) of transmission fluid to fill; the majority of automobiles contain between 12 and 16 quarts (11.3 to 15.1 liters), depending on the car’s manufacture and other criteria.

How many quarts of transmission fluid do I need for a drain and fill?

How Much Transmission Fluid Do I Need in My Car?

City Car, Family Car, Sedan	1.8 – 10.3 US quarts
Microcar	2.5 – 6.3 US quarts
Minivan, Crossover Utility Vehicle (CUV)	2 – 9.7 US quarts
Pickup, Commercial Vehicle	2.2 – 12 US quarts
Sports Utility Vehicle (SUV), Subcompact Car	3.5 – 17.1 US quarts

How much transmission fluid do you need for a transmission flush?

Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.