AHG Auto Service » Make » Dodge » How much transmission fluid does a 2013 Dodge Dart take?

How much transmission fluid does a 2013 Dodge Dart take?

The amount of transmission fluid required for a 2013 Dodge Dart depends on the specific transmission type and capacity. Unfortunately, the search results do not provide a specific answer to this question. It is recommended to consult the Dodge Dart user manual or contact a Dodge service center for accurate information on the transmission fluid capacity for your specific vehicle model and transmission type.

Is 4 quarts of transmission fluid enough?

Vehicles require an average of 4 to 17 US gallons (3.8 to 16 liters) of transmission fluid to fill; the majority of automobiles contain between 12 and 16 quarts (11.3 to 15.1 liters), depending on the car’s manufacture and other criteria.

How many quarts are needed for a transmission fluid change?

Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.

What type of transmission fluid does a 2013 Dodge Dart take?

The Dart manual calls for the same Mopar C635 DDCT/MTX fluid for both the DDCT and the manual transmission.

How many quarts of transmission fluid does a Dodge Dart take?

The factory fill fluid capacity of the 6F24 Automatic Transaxle is 7.1 L (7.5 qt.). Service fill with full torque converter and fluid cooler is 4.7 L (5 qt.)

Does a 2013 Dodge Dart have transmission fluid?

2013 Dodge Dart transmission fluid changes are exceptionally vital to keep your vehicle’s transmission cool and lubricated. If you don’t routinely and always change your fluids at least every 30,000 miles or so, you may find that your 2013 Dodge Dart transmission will expeditiously slip.

Does a 2013 Dodge Dart have a transmission filter?

Your 2013 Dodge Dart transmission filter will need to be replaced each 30,000 or 50,000 miles. Be sure to check your vehicle’s maintenance guide for more details on mileage and time intervals.

How many quarts does a 2013 Dodge Dart take?

5 quarts
Oil Grade: SEO11

Viscosity: 0W-20 (All TEMPS)
Capacity: 5 quarts (with filter). After refill check oil level.
Torque: 30 ft/lbs (Oil Drain Plug)

How often should you change the transmission fluid in a 2013 Dodge Dart?

every 30,000 – 60,000 miles
For a manual transmission, most manufacturers say you need to change the fluid every 30,000 – 60,000 miles.

How much transmission fluid do you need?

How much transmission fluid your vehicle needs ranges from as few as 8-9 quarts for small passenger vehicles to more than 20 quarts for heavy-duty trucks. As you do when determining how often to change transmission fluid, check your owner’s manual for the transmission fluid capacity.

Is 4 quarts enough transmission fluid?

Make sure that the fluid level is within the safe zone. It should be between the two marks in a warm engine. In general, transmissions take about 9 to 13 quarts to fill completely. The amount of transmission you add will vary, depending on whether you are draining or replacing it all or you are just topping it up.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment