Transmission Fluid Capacity for 2012 Chevy Cruze
The 2012 Chevy Cruze requires approximately 4.2 quarts of transmission fluid. The correct transmission fluid to use is a Dexron VI synthetic automatic transmission fluid.
If you feel like your transmission fluid is low, it’s likely that you have a leak and should get your vehicle to a dealer as soon as possible, although it’s not particularly dangerous to drive with this kind of leak for short periods of time. You’ll be notified by a warning light on the dash if there is an issue.
There is no dipstick included for checking the fluid levels because it’s assumed that you wouldn’t need to refill it on your own. However, to check the transmission fluid in a 2012 Chevy Cruze, you can use the transmission fluid dipstick located in the engine compartment. The handle is yellow in color and can be found on the right side of the engine near the rear of it.
It’s important to note that the transmission fluid used in the 2012 Chevy Cruze is a critical component, and regular maintenance, including fluid changes, is essential to ensure the proper functioning and longevity of the transmission.
In summary, the 2012 Chevy Cruze requires approximately 4.2 quarts of Dexron VI synthetic automatic transmission fluid, and it’s important to monitor the fluid levels and address any leaks promptly to maintain the optimal performance of the vehicle’s transmission.
Contents
- How many quarts does it take to fill up transmission fluid?
- What type of transmission fluid goes in a 2012 Chevy Cruze?
- What kind of transmission fluid does a 2012 Chevy Cruze 1.4 Turbo take?
- How many quarts does a 1.4 Chevy Cruze take?
- How many quarts does a 2012 Chevy Cruze 1.4 L take?
- How much transmission fluid does a 2013 Chevy Cruze take?
- How many quarts of transmission fluid does a Chevy Cruze need?
- How many quarts does a 2012 Chevy Cruze take?
- How much transmission fluid goes in a Chevy Cruze?
- How many quarts of transmission fluid does a 2012 Chevy Cruze need?
How many quarts does it take to fill up transmission fluid?
In general, transmissions take about 9 to 13 quarts to fill completely. The amount of transmission you add will vary, depending on whether you are draining or replacing it all or you are just topping it up. Again, you should avoid adding too much.
What type of transmission fluid goes in a 2012 Chevy Cruze?
Dexron VI Automatic Transmission
FRAM – Full Synthetic Dexron VI Automatic Transmission Fluid: 1 Quart (Part No. F426)
What kind of transmission fluid does a 2012 Chevy Cruze 1.4 Turbo take?
Dexron VI Automatic
Valvoline Dexron VI Automatic Transmission Fluid 1 Gallon.
How many quarts does a 1.4 Chevy Cruze take?
4.2 quarts
Capacity: With filter 4.2 quarts. After refill check oil level.
How many quarts does a 2012 Chevy Cruze 1.4 L take?
4.2 quarts
Capacity: With filter 4.2 quarts. After refill check oil level.
How much transmission fluid does a 2013 Chevy Cruze take?
For Automatic Transmission: 6T30….AF6
| Capacity: | 4.8 quarts Initial Fill. Actual capacity is between 4.5-5.5 liters. |
|---|---|
| Capacity: | 6 speed 6T30 Total Fill 8.5 quarts. |
How many quarts of transmission fluid does a Chevy Cruze need?
For Automatic Transmission: 6T40….AF6
| Capacity: | 4.2 quarts Initial Fill. |
|---|---|
| Capacity: | 6 speed 6T40 Total Fill 9 quarts. |
How many quarts does a 2012 Chevy Cruze take?
The oil capacity on the 2012 Chevrolet Cruze 1.4L engine is 4.2 US quarts (4 liters) and 4.8 US quarts (4.5 liters) for the 1.8L engine.
How much transmission fluid goes in a Chevy Cruze?
Automatic Transmission Fluid
Capacity: 6 speed AF40-6 Total Fill 7.4 quarts.
How many quarts of transmission fluid does a 2012 Chevy Cruze need?
Drain transmission fluid by pulling the drain plug on the TRANSMISSION oil pan. About 4.2-4.5 quarts will come out. Measure if possible. Refill about the same amount.
