AHG Auto Service » Make » Acura » How much oil does Acura MDX take?

How much oil does Acura MDX take?

Acura MDX Oil Capacity
The Acura MDX typically requires approximately 5.7 quarts of oil for an oil change. This is a common capacity for the Acura MDX across different model years and engine types.
It’s important to note that the exact oil capacity may vary slightly depending on the specific model year and engine type of the Acura MDX. Therefore, it’s always best to consult the owner’s manual or a trusted service professional for the most accurate information.

How many quarts of oil in a 2011 Acura MDX?

4.5 quarts

CAPACITIES
Cooling System 2.4 gallons
Engine Oil
Oil change w/filter 4.5 quarts
Total oil volume 5.3 quarts

How much oil does a 2009 Acura MDX 3.7 L take?

2009 Acura MDX – Specifications

POWERTRAIN
Engine Type 3.7-liter 24-valve aluminum-alloy SOHC VTEC® V-6
Engine Oil
Oil change w/filter 4.5 quarts 4.3 liters
Total oil volume 5.3 quarts 5.0 liters

How many quarts of oil does a 2008 Acura MDX take?

2008 Acura MDX – Specifications

POWERTRAIN
Engine Type 3.7-liter 24-valve aluminum-alloy SOHC VTEC® V6
Engine Oil Change with filter- 4.5 quarts/4.3 liters
Total – 5.3 quarts/5.0 liters
FUEL ECONOMY

Does Acura MDX require synthetic oil?

Your Acura MDX doesn’t necessarily need synthetic oil; however, it is the oil that will give your vehicle the highest level of performance. Read on to learn more about this luxury vehicle.

Does Acura MDX need synthetic oil?

The first thing is the type of engine your car has. We recommend that you use full synthetic oil in your Acura MDX, which is designed to be the highest quality motor oil for your vehicle.

How much oil does a 3.5 L Acura MDX take?

5.7 quarts
Oil Grade: API*

Viscosity: All TEMPS….0W-20
Capacity: With filter 5.7 quarts. After refill check oil level.
Capacity: Without filter 5.4 quarts. After refill check oil level.
Torque: Oil Drain Plug…30 ft/lbs Install a new washer on the drain bolt. Only use an OE drain plug.

How many quarts of oil does a 2010 Acura MDX take?

Capacity: With filter 4.5 quarts.

How much oil does a 3.5 L V6 take?

6.0 qt
Capacities and Specifications – 3.5L Ecoboost

Item Capacity
Engine oil (with oil filter) 6.0 qt (5.7 L)
Engine coolant 13.1 qt (12.4 L)
Brake fluid Between MIN/MAX on brake fluid reservoir
Rear axle fluid (four-wheel drive) 2.11 pt (1.0 L)

What kind of oil does a Acura MDX take?

The type of oil recommended for the Acura MDX is 0W-20 or 5W-20 in the Pooler region. 0W-20 is a full synthetic oil and 5W-20 is available as a blend.

Does Acura require full synthetic oil?

Acura recommends using Acura Genuine Motor Oil, sold and available at Acura dealers. If Acura Genuine Motor Oil is not used, conventional motor oil of a premium-grade or an ultimate full synthetic blend may be used and must contain the specified viscosity grade indicated in your Owner’s Manual.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment