How much oil does a Acura Integra take?

Acura Integra Engine Oil Capacity
The Acura Integra’s engine oil capacity can vary slightly depending on the specific model and engine type. Based on the information gathered from various sources, the engine oil capacity for the Acura Integra typically ranges from approximately 4.25 to 5.1 quarts. Here are some specific details:
– The Acura Integra GSR took about 5 quarts of oil to fill in one instance, as reported by a user on a forum.
– Another user reported that their Acura Integra took 4.5 quarts of oil to fill.
– Additionally, there are reports of the oil capacity being 4.25-5.1 quarts for a Type R when changing oil with a filter.
– The oil capacity differences from the LS, GSR, and ITR models were reported as 4.9 quarts for the LS and 5.1 quarts for the GSR and ITR.
It’s important to note that the specific oil capacity may vary slightly based on the model and engine type, so it’s advisable to consult the owner’s manual or a trusted mechanic for the exact oil capacity for a particular Acura Integra model.
If you have a specific Acura Integra model in mind, it’s recommended to refer to the owner’s manual or consult with a professional to ensure the accurate engine oil capacity for that particular vehicle.

How many quarts of oil does a 99 Integra take?

4.2 quarts
Capacity: With filter 4.2 quarts. After refill check oil level.

Does Acura require full synthetic oil?

Acura recommends using Acura Genuine Motor Oil, sold and available at Acura dealers. If Acura Genuine Motor Oil is not used, conventional motor oil of a premium-grade or an ultimate full synthetic blend may be used and must contain the specified viscosity grade indicated in your Owner’s Manual.

How many quarts of oil does 94 Integra take?

4 quarts
Without filter 4 quarts. After refill check oil level. Capacity: With filter 4.2 quarts.

How many quarts of oil does an Acura need?

It takes around five quarts of oil for a full Acura MDX oil change, and your SUV will be cruising through Turlock and Stockton like a dream! Find out more about the Acura MDX oil types, and be sure to check out more service tips at Acura of Modesto.

How much oil does a 1998 4.0 take?

6 quarts
Capacity: 6 quarts (with filter). After refill check oil level.

How much oil does a 98 Integra take?

Oil Grade: API*

Viscosity:	All TEMPS….5W-30 – SAE 5W-30 is preferred. Above 19 F .10W-30
Capacity:	With filter 4 quarts. After refill check oil level.
Capacity:	Without filter 3.7 quarts. After refill check oil level.
Torque:	Oil Drain Plug…33 ft/lbs

How much oil does a 95 Integra take?

1995 Acura Integra- Specifications

Engine Type	1.8-liter, 16 valve DOHC inline 4 (RS, LS, SE) 1.8-liter, 16 valve DOHC, inline 4 with VTEC (GS-R)
Final Drive	4.266	4.357
Capacities
Crankcase	4.9 U.S. qt (4.6 liters) refill capacity including filter (RS, LS, SE) 5.1 U.S. qt (4.8 liters) refill capacity including filter (GS-R)

How much oil does a Acura v6 take?

Oil Grade: API*

Viscosity:	All TEMPS….0W-20
Capacity:	With filter 4.5 quarts. After refill check oil level.
Capacity:	Without filter 4.2 quarts. After refill check oil level.
Torque:	Oil Drain Plug…30 ft/lbs Install a new washer on the drain bolt. Only use an OE drain plug.

How many quarts of oil does a 1995 Acura Integra take?

1995 Acura Integra- Specifications

Engine Type	1.8-liter, 16 valve DOHC inline 4 (RS, LS, SE) 1.8-liter, 16 valve DOHC, inline 4 with VTEC (GS-R)
Final Drive	4.266	4.357
Capacities
Crankcase	4.9 U.S. qt (4.6 liters) refill capacity including filter (RS, LS, SE) 5.1 U.S. qt (4.8 liters) refill capacity including filter (GS-R)

How much oil does a 96 Integra take?

Capacity: With filter 4 quarts. After refill check oil level.