How much oil does a 3.6 Dodge Ram 1500 take?

The 3.6 Dodge Ram 1500 takes approximately 6 quarts of oil .

How much oil does a Dodge 3.6 V6 take?

Capacity: 5.9 quarts (with filter).

How much oil does a 3.6 V6 RAM 1500 take?

six quarts
How Much Oil Does a RAM 1500 Take? Now, for the answer to “how much oil does a RAM 1500 take?” The Pentastar® V6 engine needs six quarts of oil to properly lubricate the engine system.

How much oil does a 3.6 liter Dodge engine hold?

Oil Grade: SEO11

Viscosity:	All TEMPS….5W-20
Capacity:	With filter 5.6 litres. After refill check oil level.
Torque:	Oil Drain Plug…20 ft/lbs

How much oil does a 3.6 liter V6 take?

5 quarts
Capacity: With filter 5 quarts. After refill check oil level.

How much oil does a 3.6 L engine hold?

5 quarts
Capacity: With filter 5 quarts. After refill check oil level.

What kind of oil does a 3.6 take?

If you have the 3.6L V6 engine, use SAE 5W-30 full synthetic engine oil. If you travel to a place where the temperature falls below -20 °F, install SAE 0W-30 full synthetic oil.

How much oil does a Dodge Ram v6 take?

Oil Grade: SEO11

Viscosity:	0W-20 (All TEMPS)
Capacity:	4.7 litres (with filter). After refill check oil level.
Torque:	20 ft/lbs (Oil Drain Plug)

Does RAM 1500 need full synthetic oil?

The RAM 1500 with the 5.7L V8 HEMI engine requires SAE 5W-20 full synthetic oil.

What kind of oil does a Dodge 3.6 take?

6 liters 5W-20 Dodge Challenger engine oil, oil filter, and hardware for 3.6L V6 applications. Advanced RAVENOL USVO fully synthetic oil technology meets or exceeds recommended MS-6395 motor oil quality standards. Fits 2014-2021 Dodge Challenger 3.6L V6.

What kind of oil does a RAM 1500 V6 take?

synthetic blend oil
The 3.6L Pentastar® V6 engine should be lubricated with a synthetic blend oil, preferably one with an oil weight of SAE 0W-20. However, the 5.7L HEMI® engine should be lubricated with a synthetic oil blend with a weight of SAE 5W-20.